Junkie123
About
- Username
- Junkie123
- Joined
- Visits
- 12
- Last Active
- Roles
- Member
Comments
-
I had a closer look at another Test print: It is a very strange behaviour. The extruder turns only for one of the both Filaments and stands still for the other one. And it also uses a wrong temperature for one of the filaments. The one standing stil…
-
I thought, i have set a minimum extrusion temperature, but i cant find the option anymore (any clue where to look for it? (RepRapFW / Repetier-Server?) The manual pause was in fact only 3 seconds. I will try a longer pause for manual-mode and also h…
-
Hello, and thank you for the hint! Sadly, it solves the problem only half way. Now the printer pauses at the desired points in the print. And when I hit resume, the printhead makes plausible x,y,z-moves but the extruder-motor doesnt move then a…
-
Gibt es hierzu zufällig mittlerweile eine positive Entwicklung? Habe auch einen Duet am Reptier-Server mit einem BTT-Smart-Filament Sensor, der im Gut-Fall alle 7-Filament-mm einen Puls ausgibt. Im Fehlerfall bleibt der Puls aus oder ist nicht Fila…
-
I added the switch long before you added the option in touch interface. And now there is a hole in the front panel of my printer, so i left it in action. I realised it this way (used a tutorial for it): File named "shutdown_button.py" wit following…
-
Maybe I changed to many things at once (Repetier-Server update + Marlin changes + BTT-Smart-Filament-Sensor). I ahve now plugged of anythin but the SKR from the Pi, an have now 2 Prints finished with over an hout print-time. - I hope this is not a c…
-
and one more directly after an in-print-shutdown (gdb) attach 787Attaching to process 787[New LWP 799][New LWP 808][New LWP 809][New LWP 810][New LWP 811][New LWP 812][New LWP 816][New LWP 817][New LWP 818][New LWP 819][New LWP 820][New LWP 821][Ne…
-
Nearly forgot the following...: (gdb) thread apply all bt Thread 18 (LWP 1241): #0 0x00879b0c in __syscall_cp_c () #1 0x00881180 in __timedwait_cp () #2 0x00879f8c in __pthread_cond_timedwait_time64 () #3 0x76b6870c in ?? () Backtrace stopped: …
-
I dont know what happened now. I reactivated wifi to clean up sys-log a littlebit for error search. (dtoverlay=disable-wifi => #dtoverlay=disable-wifi) know RS crashes even witout printing. Here is the gdb output: (gdb) attach 786 Attaching to p…
-
Hello, i started now over again with the new SD-image File "Repetier-Server-Image_1_3_0_v28.img" I copied no configuration-file from the old SD, but typed everything manually again The error is still present and gdb is - at least for me - as usefu…
-
Have just uploaded syslog.log to dropbox. The Repetier server image should be "Repetier-Server-Image_0_85_2_v7". Since I had a some problems getting my webcam and touchscreen to work properly, once it was set up, i saw no reason to refresh the ima…
-
I tried to follow the procedure from your link. But wasnt really successful. in short i did the following in ssh: sudo apt-get update sudo apt-get install gdb sudo gdb attach 1139 set logging on sudo gdb c then I started a print - wich stopped by …
-
P.S.: I didn't activate or use MQTT actively. Since it seems to be active ("Stopping MQTT subsystem ..."), it was activated automatically with the last update.
-
Hello, I just added the (complete) server.log in the Dropbox. I am not sure when the printer shut down, but I would guess the log file of the print-logs have been written until short before it. So the last two crashes would have been at 24.03.202…
-
Vielen Dank für die ausführliche Antwort! (Ich melde mich mal per PN nach um den Thread hier nicht zu sehr zu strapazieren) Und um den Bogen zum ursprünglichen Thema zurück zu bekommen: Auf dem Rumba32 würden dann auch die 2208er Treiber problemlos…
-
Moin nochmal, da ich aktuell unerklärliche (möglicherweise) Treiber-kompatiblitäts-Probleme habe (https://reprap.org/forum/read.php?249,880325 ) Überlege ich entweder meinen Ramps durch einen neueren Ramps zu ersetzen um dem Problem auf die Schlich…
-
Hallo, mittlerweile ist ja etwas Zeit verstrichen, daher erneuere ich die Frage von spikebhv mal: Unterstützt Repetier mittlerweile die UART Funktionen vom TMC2208? (Hab die Treiber gerade angeschafft und echt wenig Lust von Repetier weg zu wechseln)
-
Sorry, das hätte ich erwähnen sollen: Alle verlinkten Bilder in meinem letzten Post stammen noch aus der Zeit, bevor ich das PID-Autotuning gemacht hatte. Die Temperaturstufen hatte ich angefahren, um zu testen ob der Soll-Ist Offset linear steigt o…
-
Danke für die schnelle Antwort! Das mit den schlagartigen Temperaturabfallen war mir bisher gar nicht aufgefallen. Der Extruder stand bei der Messung komplett still also vielleicht sogar eher der Thermistor und nicht das Kabel. Ich werde mich dann…