Ikswoknib

Comments

• Now it works, thank you very much.

  in MQTT or HTTP Message when Shutdown server Comment by Ikswoknib November 2022
• I got it partially to work, i made a python script which does what  i want it to do. Then i changed the xml file.When i tell it via the web-frontend to shutdown i get the udp message and it shuts down.But my problem is that in the User Interface on …

  in MQTT or HTTP Message when Shutdown server Comment by Ikswoknib November 2022
• But how can I manage it to get that info if it shuts down automatically after print?

  in MQTT or HTTP Message when Shutdown server Comment by Ikswoknib November 2022
• But how can I manage it to get that info if it shuts down automatically after print?

  in MQTT or HTTP Message when Shutdown server Comment by Ikswoknib November 2022
• Okay, I managed to get it to work with rewriting the M355 command.Thanks for the help

  in Case light over I2c PCA9685 Comment by Ikswoknib May 2019
• For me it would be more important to do from the Repetier Server than from the GUI, so I could simply rewrite the M355 Command, then i could use it with the Server but not from the GUI. If i'm not able to get it i'll come back to you, best regards. …

  in Case light over I2c PCA9685 Comment by Ikswoknib April 2019
• Hello, thanks for that, i'll try it.But i wanted to have it integratet, so that i can use it from within the printer UI and directly from the repetier server menu, without adding extra Printer makro. I think this is not easy to do ?

  in Case light over I2c PCA9685 Comment by Ikswoknib April 2019
• RAyWB said: do you use Repetier Firmware and the custom events example from github for the pca9685? Yes I do.

  in Case light over I2c PCA9685 Comment by Ikswoknib April 2019
• Ups, no i was wrong. It is a melzi Board. I dont want an PWM Frequency, I want only switch it on and off, no need for dimming. But I want to use one of the PWM Output for the case light, because directly on the board there is no GPIO free to use it.…

  in Case light over I2c PCA9685 Comment by Ikswoknib April 2019
• iwconfig: eth0      no wireless extensions. lo        no wireless extensions. wlan0     unassociated  Nickname:""           Mode:Managed  Frequency=2.412 GHz  Access Point: Not-Associated           Sensitivity:0/0           Retry:off   RTS thr:off…

  in Repetier Server on Raspberry Pi 1 with Edimax Wifi Stick Comment by Ikswoknib February 2019
• Now i tried the newest Image.If I go to Wifi settings it looks like this: It says no adapter installed, but it can find the WLAN's.But it is not able to connect... Any Idea ?

  in Repetier Server on Raspberry Pi 1 with Edimax Wifi Stick Comment by Ikswoknib February 2019
• This works quite good.Thank you for the help best regards Iksi

  in Printing a Dot in Lasermode Comment by Ikswoknib January 2019
• Yes I know, with g0 it does only moving, without laser. But even with G1 the laser is only on if moving x or Y. I use firmware 1.02

  in Printing a Dot in Lasermode Comment by Ikswoknib January 2019
• But when using only z-move the laser is off. Only if x or Y move the laser goes on

  in Printing a Dot in Lasermode Comment by Ikswoknib January 2019
• I have installed Raspbian Lite and configured the Wlan, no ProblemsAfterwards i have installed Repetier Server, now it works without Problems, but i can't set it up in Repetier, but this is okay for me.... Thanks for your Help

  in Repetier Server on Raspberry Pi 1 with Edimax Wifi Stick Comment by Ikswoknib January 2019