› ›

HynX

About

Username
HynX
Joined
Visits
25
Last Active
Roles
Member

Comments

  • Hi. I also tested 1.0.3 fw. Sd card works. But printing (from sdcard, also pc) is too slow with occasional pause (like slow reading commands). Buffer is still on 16. Not react to change speed multiplier.I tried change eeprom usage, also disable eepr…
    in sd card does not work no 1.0.2 Comment by HynX November 2018
  • I am sorry, my wrong. I forgot change eeprom usage in config tool. It works perfectly. Thank You very much
    in Feedrate for filament change. Comment by HynX September 2018
  • Hi. I changed booth values (RETRACTION_SPEED and RETRACTION_UNDO_SPEED), but dont have any effect for M600 command :-(  For my reason is best way to use "UI_SET_EXTRUDER_FEEDRATE" for M600 (change filament via lcd). I have Arduino DUE with RADDS, Fi…
    in Feedrate for filament change. Comment by HynX September 2018
  • no answer?
    in Feedrate for filament change. Comment by HynX September 2018
  • Thank You very much, it works. My wrong, because i testing this with low temperature. I did not know about variable MAX_ROOM_TEMPERATURE.
    in M109 wait until cooling Comment by HynX August 2017
  • I try a new config. Without too fast refreshing. I find the problem in UI_PAGES_DURATION set to 0. When I change this value, all is good. Thank You very much
    in Radds + LCD Comment by HynX January 2017
  • I use original repetier firmware 1.0.0dev. Yesterday I downloaded latest 1.0.0dev release and upload to printer.
    in Radds + LCD Comment by HynX January 2017
  • I downloaded latest version of dev firmware (today). PRINTLINE_CACHE_SIZE set to 96, but I have still same issue.
    in Radds + LCD Comment by HynX January 2017
  • Second video is for demonstration only how fast the LCD refreshing. It is good view on coordinates section screen. My all prints is homing with G28 g-code. Yes, it is stuttering in curves or small segments. But when I go to the menu on the LCD, the…
    in Radds + LCD Comment by HynX January 2017
  • Now it works very well, thank You very much ;-)
    in Board fan PWM Comment by HynX August 2016
  • Still not work correctly :-( When I turn on my power supply, the board fan not work. When i put print, fan board is on "BOARD_FAN_SPEED". After print is on "BOARD_FAN_MIN_SPEED". This work very well. But before print, when i turn on my printer on po…
    in Board fan PWM Comment by HynX August 2016
  • Hi, something new?
    in Board fan PWM Comment by HynX August 2016
  • No fan.
    in Board fan PWM Comment by HynX August 2016
  • Oh, sorry, i forgot tell, i have Due with Radds Now it works, but only after print. I require that work also before print. We are on good way Thank You very much.
    in Board fan PWM Comment by HynX August 2016
  • Not working When i finding string "BOARD_FAN_MIN_SPEED" in fw, it is only in configuration.h file
    in Board fan PWM Comment by HynX August 2016
  • HI. Can You add to fw min. speed of board fan (with able to set via PWM) when printer is in stand by mode (not priting)? I have board and power supply in case and currently board fan is on only if headbed or stepper motors is active. Otherwise no…
    in Board fan PWM Comment by HynX August 2016