Edward_Phantom
About
- Username
- Edward_Phantom
- Joined
- Visits
- 34
- Last Active
- Roles
- Member
Comments
-
i think that they are asking to activate this lcd inside repetier, because i have the same LCD and they not work on repetier yet.
-
-
well, atm i got only 71mm of usable radius, someone can help me find where i doing erros ?
-
backlighted
-
well, now i have made a lot of tweaks on firmware - max X / Y is now 180 instead 200, like max printable radius is now 90 instead 100 - so, i got a better use of my bed, i do a calibrations special into my Zprobe ( the models is that use the extrude…
-
ok, i will try this weekend reduce my printable area from 200mm to 180mm and place the G33 box inside the max values that i can reach ?
-
trying everything here. onetime i will got when i discovery watts happening i return to share , thanks !
-
When I said locally I mean with the local IP (192.x.x.x or 10.x.x.x) of your computer from inside your intranet. Often windows blocks the port until you say to allow external access. Then accessing external ip from intranet is the next test. Since y…
-
Gotcha ! i found a bug on web wizard ! Frist of all : thanks repetier, it´s work like a charm, and solve the problem, but when i re-edit the bug still occurring, however , when i know that it´s a problem with "steps per mm" i see that they alway…
-
Going home to test now!
-
define XAXIS_STEPS_PER_MM 80 #define YAXIS_STEPS_PER_MM 80 #define ZAXIS_STEPS_PER_MM .... this, at configuration.h come today without these values (80, 80 ,etc...), doing an error on eepron.cpp , plz, check this
-
07-03-2016 : i make a entire new config from web wizard, and now everthing is running fine ! thanks guys, repetier rocks !
-
I'm Desperate to return to home to try too. . (
-
arduino 1.6.7 here, do you can give me de directions to try the latest version from master (4.3.2016) i use the tool of the main site.
-
ok guys i set DRIVE_SYSTEM == 0 on configuration.H and upload to mega via ide, but not work here, extruder still not moving. any tips ? from eyal : G1 E-6.00000 F1200.00000 make then dop a first turn, but after it, they don´t turn anymore.