BigAl
About
- Username
- BigAl
- Joined
- Visits
- 8
- Last Active
- Roles
- Member
Comments
-
Sorry für die späte Antwort. Ja, die Verbindung ist grün. Wenn ich mir die Konsole anschaue, dann werden da keine Befehle angezeigt (M105-Filter aus). Sobald ich manuell einen Befehl sende (z.B. "Zeige Fähigkeiten" aus dem Befehle-Menü) fängt die V…
-
Die Zeile "#!/bin/bash" hatte ich nicht drin. Wenn ich die ins Script rein mache geht es. Die war aber noch nie drin. Dann brauche ich die zukünftig... Vielen Dank nochmal für den tollen Support!
-
Ok. Danke. Werd's testen.
-
BigAl said: Ok. I will try that. Because with the standard "extcommands.xml" it will not work anymore... Mist. Das ist auch keine Option. Ich will ja nur einen GPIO am Pi ein- bzw. ausschalten...
-
Ok. I will try that. Because with the standard "extcommands.xml" it will not work anymore...
-
The log shows nothing about that. It seems that the command is not tried executed at all. Tomorrow I will add an additional script that will write some text in file or so to see what's happen... At the moment I'm running out of ideas...
-
I made my update using the integrated update function through the web interface... I've tested the scripts with e.g. "sudo -u repetierserver /home/pi/scripts/lightoff.sh". This works fine. Any other ideas?
-
Repetier said: /home/pi/scripts/lighton.sh> /home/pi/scripts/lightoff.sh> there is an extra > after .sh making the command fail. /home/pi/scripts/lighton.sh /home/pi/scripts/lightoff.sh should be corre…
-
I forgot: I run Repetier Server Pro 0.91.2 on a Raspberry Pi 3+.
-
Thank you So I'm looking forward for the next update...
-
This sounds good. If this is possible the fixed position can also be entered in the G-Code before the ";@snapshot" command... But the ";@fixed_snapshot" sounds perfect. But in this case it should be possible to block the Repetier Server from doing t…
-
Thank you. I will try... But again to point 2. Every actual slicer (Slic3r, Cura, Simplify3D, ...) has the possibility to enter G-Code "Before Layer Change" and "After Layer Change". Why not give the user the possibility to control the point in tim…
-
Ja, der MK3 ist - abgesehen von den Software-Eigenheiten - eine echt guter Drucker. War anfangs skeptisch, bin aber mittlerweile ein totaler Fan dieses Druckers. Extrem leise und extrem zuverlässig. Das die Software kontinuierlich weiter entwickelt …
-
Wie gesagt: Ist mir erst das zweite mal passiert. Ist also einer dieser Fehler die nicht so leicht zu reproduzieren sind. Ich bin ebenfalls Software-Entwickler (ich schreibe Software für die Forschung und Industrie) und weiß wie ärgerlich das ist...…
-
Dann lege ich mal los: Zu dem Zeitpunkt des Abbruchs war ich im Web-Interface. Glaube auf der Seite WebCam/Zeitraffer. Ich habe versucht eine Zeit einzugeben, was über die Tastatur scheinbar nicht möglich ist. Gibt man z.B. mit der Tastatur 10.0 ein…
-
Hi,the communication to the Prusa's printer is imho a little bit laggy in some cases. This is not the fault of the Repetier Server but the inconsistency of the Prusa firmware. It is very easy to set the printer in "wait forever" states. E. g. when t…