AbsoluteCatalyst
About
- Username
- AbsoluteCatalyst
- Joined
- Visits
- 8
- Last Active
- Roles
- Member
Comments
-
karl_ranseier said: Yes, I understand. So what are exactly the parameters time1, up1, down1, time2, up2, down2 ? That was a small error. They've been corrected to temp1, timeUp1, timeDown1, temp2, timeUp2, timeDown2.
-
This is a very silly Ender 3 V2 firmware problem i've seen some users reporting online. It's because it's temperature output string has doubled characters. (Causes a little bit of trouble actually pasting it here on these forums too) The server j…
-
Can't reproduce it any longer. Looks like that was it! Thanks. Interesting, I wonder if it was creating any strange artifacts or vibrations in prints. Can't see any though, coming from my main Due machine. I hadn't run the analyzer on m…
-
https://drive.google.com/file/d/1jU0PkJ8GWlr0MIOuOH7GXg20ARW1emsr/view?usp=drivesdk Sorry about that, file should be public now I'll do another test today soon too the command I used was G1 X150 F500000 (just maxed out speed)
-
I was curious and wanted to see this too. These are my results (I don't have slow direction changed enabled btw) https://tinyurl.com/y4c49b5r My step pin is on the top, dir on the bottom. It happens during interpolated moves/direction changes/corn…
-
No prob, be sure to check out the repo later in the week for more fixes! Found & fixed another small/elusive crash if you happen to have a Z home in your start tool script
-
Hey! I was able to reproduce this and track it down with my stlink. Can you try the very small fix I pulled to the main repo here: https://github.com/repetier/Repetier-Firmware/pull/986/commits/2dce0d9fa60357f18b4f7dc01f886a2d07cc7349 and see if tha…