ale92
About
- Username
- ale92
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
wow it works!!! Thanks a lot for help!!! I have learned and understood a lot of things thanks to you Now just let me satisfy my curiosity... do you know if Octoprint uses "Ping-Pong" mode for firmware/host communication? Because I've tried that a…
-
I've also this lines: // Host Keepalive//// When enabled Marlin will send a busy status message to the host// every couple of seconds when it can't accept commands.//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like ke…
-
I understand what you're saying, but I don't manage to find the correct lines in my firmware to fix. I'm really sorry but I need a lot of help xD. The lines I've found are these, is it correct? // Bad Serial-connections can miss a received command …
-
Firstly I've tried to set timeout to 0,1 seconds, it reacts fast but the commands get slow for a while, ruining the printing. Another thing I've tried to do is to enable PingPong mode and set timeout to 0,1 seconds, doing this it looks like is worki…
-
I still have problems, I've tried to switch RTS and DTR but same issue... There are moments that the print works fine but between these moments there are some breaks, as you can see in this piece of log: 14:37:19.470: N1114 G1 X111.392 Y101.039 E22…
-
I apologize for the second postof answer, anyway I want to tell you that I've solved the internet "issues" on the computer, I've made a reset for the internet settings and now it works again! I'll let you know about the printing. Thanks for your k…
-
Sorry, maybe I wrote too fast and forgot some details. I'm just using the ethernet cable for the raspberry. Anyway now on my pc I'm not able anymore to access to the modem page... The printer is an Alfawise U30 Pro. I've checked with ACK enabled and…