hbanko
About
- Username
- hbanko
- Joined
- Visits
- 2
- Last Active
- Roles
- Member
Comments
-
Thanks that makes and I did make changes accordingly. Actually had to bring it down to 80 and now the auto leveling completes. I still see random messages like "Warning:Invalid delta coordinate - move ignored x:4..." popping up. The first 2 or 3 la…
-
Here are my Z-Probing and Distortion settings: // #################### Z-Probing ##################### #define Z_PROBE_Z_OFFSET 0#define Z_PROBE_Z_OFFSET_MODE 0#define UI_BED_COATING 1#define FEATURE_Z_PROBE 1#define EXTRUDER_IS_Z_PROBE 0#define Z_…
-
Thanks Repetier! I followed your advice and all homing / moving works perfectly now. Also sorted some issues I then had to learn I had with the extruders. Just did the first test print and I am quite pleased that I got the latest Dev version of Repe…
-
Thank you so much!! That does work now. I have also reversed X Y an Z movement. Manual button presses as well as the homing does work now in the right directions. Just one remaining problem and this thing with 3 Extruders and a lot of other bells an…
-
/* This file is part of Repetier-Firmware. Repetier-Firmware is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of …
-
Thank you! I extracted all settings I could. Checked EEPROM and Console and documented it all. Today I was brave enough to finally updated the firmware to 1.0.3 and enabled Autolevel and all corresponding options with BL Touch. After some minor bac…