Svhorsch
About
- Username
- Svhorsch
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
Wow, thanks, that was exactly the problem, had the following gcode as after print: G1 X-65 Y300 F9000, after changing it to G28 X0 Y0 it works like a charm. But i think its a bit strange that this was there already out of the box, could it be that t…
-
Now that i had some more looks into the behaviour, i can describe it a bit better. It seems like that the server has its own parking position, so when the print is done, first the normal parking position gets applied (like the above mentioned 0, ?, …
-
Then maybe i got the protocol wrong, what happens in my mind is like the COMMAND - OK transfer, like if i submit 10 commands, i will get 10 OK's at that time when the printer either starts executing it or finished execute it. that would then give th…
-
Cool, thanks! i really dont know much about the printing times deviations, but i really could imagin that if you print 10 different models and compare the ETA to the effective time, a "general" factor should appear which at least points into a good…
-
The raspberry was just an example for a device which could be mounted on the printer, but if i got the repetier server correctly, i would have the same problem cause then the server would connect via tcp/ip to the printer, and if that connection fai…
-
Hey there, thanks for the fast response! This is a really good point, and of course, if the printer resets, it absolutely makes no sense to continue sending the data. But on the other hand, i just wrote a simple program for my computer, which does …