The3dRoom
About
- Username
- The3dRoom
- Joined
- Visits
- 16
- Last Active
- Roles
- Member
Comments
-
Great stuff and I do understand the level of complexity involved. If you need any assistance testing, I would be happy to run the beta on one of my instances. Cheers John
-
Thanks for the update. Do you have any guesstimate of timescale for 1.5? Cheers John
-
Thanks for adding this in 1.4.9 Greatly appreciated!
-
Remembering the last used project server would be perfect.
-
Repetier said: The problem is that we now send a state also for disconnected printers as we had added 2 variables that are needed in that case. But not connected the other variables make no sense and are not send. So there needs one line be c…
-
Update to the above. Although my actions allowed the HA integration to start, it is still borked. Sensors are not updating. This has to be down to a change (intentional or otherwise) in the latest RS version. The integration was working perfectly we…
-
Just upgraded to RS 1.2.1 this morning and I can confirm the Home Assistant integration now fails to startup. As mentioned above, it is erroring with: KeyError: 'activeExtruder' Looking at the WebSocket responses, activeExtruder is (now) only retur…
-
Fantastic - thanks so much!
-
Thanks for the V1.0.1 update - my monitored folders are now sweet again. Cheers John
-
Cool - thanks :-)
-
After many reboots, deleting the workdispatcher.sql file etc, I am able to print but only by uploading GCode directly. If I try anything using the monitored autoprint folders, I still get the NaNs time issue and associated lock up/crash which can on…
-
Route looked to be OK and other devices on the same subnet could be pinged without an issue. I re-booted everything (router, access points etc) and all is well. Still an odd one though as nothing else was affected. Thanks for your help and apologies…
-
Curious. I'm getting the following so it looks like some sort of networking issue: 2020-08-22 09:19:38: error fetchTextFromWeb:Net Exception: No route to host2020-08-22 09:19:38: Execution of webAction e3pon failed. Error Code:400 msg: I can't ping …
-
Thanks for the reply - this is the URL for one of them (they are all the same except for IP address and /off at the end). http://192.168.69.226/on
-
I'll have to check the time but the sonoffs being addressed are completely local and not secured so no certs are involved
-
That's what I was thinking. Line in extcommands is: bash /home/pi/scripts/e3delayoff.sh The corresponding e3delayoff.sh code is: #!/bin/bashsleep 10mcurl http://192.168.69.222/offcurl -u o.9mGG1TrvWgJqLz3hhOIkuoMCMo5IejRR: -X POST https://api.push…