tonyowens_uk
About
- Username
- tonyowens_uk
- Joined
- Visits
- 8
- Last Active
- Roles
- Member
Comments
-
I'm slowly immersing into a new world (to me) of microcontrollers, firmware and their coding. I've started with the v2 documentation and looking at the v2 files on github. I have a fresh Due to play with and have documented the wiring to the RADDS i…
-
Thats fantastic Markus. I wasn't aware that V2 was that far developed although I did suspect that chamber temp control was not directly present in the V0.92.8 firmware I have loaded. To answer you question about the EEPROM data, this is the new RP4 …
-
Hi Markus. An update on my project: The extruder selection servo and chamber fans work directly from the Repetier Server HMI panel with no changes. I am working my way through definition of a new configuration.h file. One question arises: The cham…
-
The new RP4/touchscreen was integrated successfully with the existing Due/RADDS motion planner/controller board and the printer webcam yesterday and Repetier Server is available across our LAN. Very smooth! Next, there are some bugfixes to do e.g. …
-
Very generous, kind sir. Would you happen to have a pins.h file to go with that? Our machine is a D600, which has almost identical motion hardware and control components to an XD40. This is very helpful! Thanks Tony
-
Yes, but... The 'but' is that the Due is still running 0.92.8, while I plan to add both autolevelling and filament sensing. My thought was that release 1.00 would be better. To provide a path back, I'm going to install a fresh Due with the upgrade a…
-
That's the plan now. I was hoping to access the existing configuration.h file, but in my developing understanding about Arduino Due, there is no filing system to speak of, and this file would only exist in the hands of the machine developer. So I'll…
-
Well that seemed to work fine. Except (nsurprisingly perhaps), the PI-connected webcam doesn't work. Thanks. Having thought about this a bit more, I believe I am going to: 1. Add another PI 4B+ to this machine, with a second 7" touchscrween, to hos…
-
Hi, thanks for your advice, and my apologies about the delay getting back to this issue. The machine is a large Massportal Delta using Arduino Due/RADDS 1.5 running Repetier_0.98.8, via Protocol 1.0, and has come to me totally undocumented and somew…