ARCH_T
About
- Username
- ARCH_T
- Joined
- Visits
- 10
- Last Active
- Roles
- Member
Comments
-
No, it doesn't work. The problem happens when the raspberry pi does the upgrade (not the update). I think it could be an incompatibility or something wrong with the new version
-
Repetier said: My guess is that you changed back a config to some original settings with the update. So first try running the screen installation steps you did when you first configured the screen. On next update then watch out if debian off…
-
I see that the new version (0.94.1) came out but this problem has not been completely resolved. After turning off the printer, the Repetier Server takes about 40 seconds to detect that the printer has been turned off. It's normal? In the previous ve…
-
Ok, Thanks for your explanation
-
Another thing I noticed is that sometimes the symbol of thunder appears, but there was no Undervoltage. It's normal? Because if I refresh the page, the thunder symbol disappears.Another question: In the previous version of RepetierServer, only one e…
-
Thanks. As soon as you have a solution to this problem, I would ask you to tell me how to solve it. Or If there is a new beta version that fixes it. Thank you!
-
No, unfortunately it doesn't work that way (disabling "Continue print after fast reconnect") This does not seem to be the cause of the problem
-
The printer is the same (MK3s with MMU2s) , only the Repetier version has changed. The printer only disconnects making an emergency stop or removing the cable. In version 0.93 it worked perfectly.
-
In other versions of RepetierServer it always worked correctly. I don't know why it doesn't work equally well on this one. It should.
-
Repetier said: See https://www.repetier-server.com/knowledgebase/web-action-to-control-a-remote-controlled-socket/ Thanks Repetier, It works Can you tell me how I can find a URL for the icon?
-
Repetier said: Just a side node - next release will natively support web requests as commands to e.g. call IFTTT maker webhooks to disable a plug. These commands will also be available in menus then. That makes it very easy to switch any plug…
-
Repetier said: Already found the reason and fixed it for me. So will be part of the next bugfix release. Will just wait a few days to see if there is more gone wrong with the update. Thanks Repetier
-
Hello, i have the same problem. My touchscreen (Velleman VMP400 - 3.5" 320 x 480) dont scroll down and i cant reach icons below. I would appreciate that you could solve this problem. In other versions it always worked perfectly. Thank you
-
Repetier said: I hope in april. Thanks!
-
Repetier said: Just a side node - next release will natively support web requests as commands to e.g. call IFTTT maker webhooks to disable a plug. These commands will also be available in menus then. That makes it very easy to switch any plug…
-
can you post some images of your configuration? to compare and check what's wrong. Many thanks for your help
-
Sorry Freakadude but it didn't work
-
Ahh OK But like that? anything incorrect because it didn't work
-
Thank you very much for your help Freakadude but I still couldn't solve it And sorry Can you confirm that the steps are all correctly executed? 1-Download script - ok 2-Copy the script onto my RPI. The folder can be "/home/pi/"? 3, 4 an 5- Does th…
-
Hello Freakadude In the script I just have to change the first three parameters (ip, port and cmd)? Thanks
-
Thanks a lot Freakadude! I will give it a try.
-
Yeah me too Freakadude can you explain how you did that? Thanks in advance