dragsterbox

Comments

• Quick update on this. I made a couple of tests and the issue was a bad ribbon cable. Now, everything is working great. Thank you for your help

  in Pi Camera V2 not working with MJPG-Streamer Comment by dragsterbox January 2022
• pi@RepetierServer:~ $ /usr/bin/vcgencmd get_camerasupported=1 detected=0 When I wrote the first post, it was detected ...

  in Pi Camera V2 not working with MJPG-Streamer Comment by dragsterbox January 2022
• Yes I am using your image and indeed I did install mjpg_streamer and overwrote all the files 1.  No rasp webcam detected! 2. webcam.conf is not in Bin folder # Framerate and capture size. Bigger sizes and frequencies need more storage/ram and ban…

  in Pi Camera V2 not working with MJPG-Streamer Comment by dragsterbox January 2022
• Well, I downloaded the PI image from your website a few months ago when I was building the printer. Then I installed Klipper This is what I have when I run the cmd: No LSB modules are available.Distributor ID: RaspbianDescription:    Raspbian GNU/…

  in Pi Camera V2 not working with MJPG-Streamer Comment by dragsterbox January 2022
• I also confirm that camera is detected /usr/bin/vcgencmd get_camera supported=1 detected=1 sudo /usr/local/Repetier-Setup/bin/startAllCams Start from directory /usr/local/Repetier-Setup/binenabling daemon modeforked to background (2482)Testing act…

  in Pi Camera V2 not working with MJPG-Streamer Comment by dragsterbox January 2022
• Does is mean that there is no workaround to this, even with a script or something? By workaround, I am meaning accessible from the lcd menu, without extra files and manual intervention ? For now, there only that that is working for me is made of 3 …

  in G-code folder for virual SD card setup in Klipper Comment by dragsterbox October 2021
• Let's keep it simple and focus on the prusa slic3r export. When I export a file to repetier server from my prusa slicer tool, it goes straight to the models folder with the extra files generated. If I want to transfer it to the project folder, I ne…

  in G-code folder for virual SD card setup in Klipper Comment by dragsterbox October 2021
• Hi,  I have created both a project and a folder for testing purpose. From the web interface, for me to be able to upload a G-code, I need to open the project and upload the file from there. What I would like to achieve is to be able to make it from…

  in G-code folder for virual SD card setup in Klipper Comment by dragsterbox October 2021
• Hi, I managed to unblock my virtual sd issue and use the lcd menu to select and printe files. However and as you mentioned, for every file there are extra files generated making a mess in the folder. Is the a way to get a folder with the source file…

  in G-code folder for virual SD card setup in Klipper Comment by dragsterbox October 2021
• Hello, The only workaround that I have found to fix this issue is to edit the home cmds and add one line with the M114 cmd. Now it is working very fine.

  in Printer manual control (move) does not move the correct distance for XY axis. Z axis work fine Comment by dragsterbox September 2021
• Hi, the problem is solved. Please close the ticket.. Thank you

  in Connectivity issue with Klipper firmware and SKR Mini E3 v2.0 Comment by dragsterbox September 2021
• You can access my log file and klipper config here.

  in Connectivity issue with Klipper firmware and SKR Mini E3 v2.0 Comment by dragsterbox September 2021
• Hello, A little update. I managed to see the /tmp/printer port and connect (Like here | alternative solution). Now I am having the message below and thousand of messages telling that the firmware has stopped and I can only send host and shell comm…

  in Connectivity issue with Klipper firmware and SKR Mini E3 v2.0 Comment by dragsterbox September 2021
• I am using Repetier Server on a raspberry pi 4 with Klipper. I am not able to connect to the printer. May be a prints creen will be more relevant, see below:

  in Connectivity issue with Klipper firmware and SKR Mini E3 v2.0 Comment by dragsterbox September 2021
• Alright, I found the issue. I have had to re set permissions. I confirm that it is working now. Thanks a lot for your help

  in External command not working with script and relay board Comment by dragsterbox December 2019
• I have created the script with the nano command and placed it in /var/lib/Repetier-Server/scripts Still getting the same results. This is the lines that I inserted when using nano cmd #!/bin/bash gpio mode 24 outgpio write 24 1 Did I miss someth…

  in External command not working with script and relay board Comment by dragsterbox December 2019
• Link to my files

  in External command not working with script and relay board Comment by dragsterbox December 2019
• I made a fresh install with the same results: pi@Repetier-Server:~ $ type gpiogpio is hashed (/usr/bin/gpio)pi@Repetier-Server:~ $ type bashbash is /bin/bash Here is the step by step that I have followed: 1. Flash SD card with Etcher (Repetier-S…

  in External command not working with script and relay board Comment by dragsterbox December 2019
• I also found the gpio folder located here: / sys / class / gpio I saw different ways to install gpio in this article. This is a bit cleared but I need to know the best method to install and where to export gpio.

  in External command not working with script and relay board Comment by dragsterbox December 2019
• Wiringpi is installed in home/pi. I purged the install. Where am I supposed to install it and how to proceed ?

  in External command not working with script and relay board Comment by dragsterbox December 2019
• pi@Repetier-Server:~ $ gpiogpio: At your service!  Type: gpio -h for full details and        gpio readall for a quick printout of your connector details

  in External command not working with script and relay board Comment by dragsterbox December 2019
• Here we go: 1.  pi@Repetier-Server:~ $ sudo -u repetierserver /var/lib/Repetier-Server/scripts/relay_01_on.sh : No such file or directory pi@Repetier-Server:~ $ /var/lib/Repetier-Server/scripts/relay_01_on.sh: No such file or directory 2. pi@Repet…

  in External command not working with script and relay board Comment by dragsterbox December 2019
• I have tried this one with the same results. Still having this "No such file or directory" message and nothing happens when I try to run the script from the console

  in External command not working with script and relay board Comment by dragsterbox December 2019
• When a I run the command, I get this message: "No such file or directory" I am probably doing something wrong again. I confirm that both files are in the correct folder and I double checked the spelling as well. See the printscreen Can you confir…

  in External command not working with script and relay board Comment by dragsterbox December 2019
• Hi,  I am probably doing something wrong but I cannot get these scripts working. I am not an expert and collected all the info from google. Step 1: copy scripts to /var/lib/Repetier-Server/scripts           --> scripts are .sh file Step 2: set …

  in External command not working with script and relay board Comment by dragsterbox December 2019
• Hi, I confirm that Repetier-server is working now and I managed to install the printer with port /dev/pts/1. However, I am still having the stock LCD panel navigation issues. When I install octoprint, I have no issues at all and I cannot home print…

  in LCD panel not working when repetier server and klipper are running Comment by dragsterbox September 2019
• Without the server being connected, Klipper will not work. When I boot with my second SD where octoprint is installed, the menu is working perfectly. I have had to install tty0tty on repetie and select /dev/pts/1 port to get the printer connected. t…

  in LCD panel not working when repetier server and klipper are running Comment by dragsterbox September 2019