bkey1970

Comments

• Tried to edit the code, but, created more errors than fixes, so I just updated to the Development branch. Once I took out the references to Russian language, it works now.  Thanks for the help!

  in Light control - On but not Off Comment by bkey1970 September 2019
• Tried to edit the code, but, created more errors than fixes, so I just updated to the Development branch. Once I took out the references to Russian language, it works now.  Thanks for the help!

  in Light control - On but not Off Comment by bkey1970 September 2019
• Just to confirm I was using current - I redownloaded it from repetier.com and re-flashed the firmware. The website is claiming 1.0.3 with the config tool.  Same result as before. 

  in Light control - On but not Off Comment by bkey1970 September 2019
• Using the web interface, it works using the virtual port, so I guess it's somewhere in my firmware config, maybe? You want that in full?  Using the virtual port "VirtualCartisan":  14:52:58.426: N32 M117 192.168.1.190:3344 14:53:18.604: ok (22)14:…

  in Light control - On but not Off Comment by bkey1970 September 2019
• Update: my server install failed, started rebooting continuously without coming up - so I'm downloading a new image and reinstalling from scratch. 

  in Light control - On but not Off Comment by bkey1970 September 2019
• OK - Finally got it tested again (been busy) - Same result.  Would you want my configuration.h file from the firmware as well?  Here's the data:  2:49:16.158: N20 M802:49:16.163: ok 202:49:56.739: wait (40)2:49:56.831: N21 M355 S12:49:56.837: ok …

  in Light control - On but not Off Comment by bkey1970 September 2019
• I'm on 0.92.0 - upgrading, then testing again. 

  in Light control - On but not Off Comment by bkey1970 September 2019
• I'm doing the change from the Pi touchscreen or the Web interface. I could wait as far as 15 minutes with no change. It'll always send S1.  I've rigged together the old display to work with the RAMPS setup, so I could see if direct control works, w…

  in Light control - On but not Off Comment by bkey1970 September 2019
• 1:30:11.288: N100 M355 S11:30:12.045: N101 M355 S11:30:12.659: N102 M355 S11:30:13.324: N103 M355 S11:30:13.676: N104 M355 S1

  in Light control - On but not Off Comment by bkey1970 September 2019
• pressing the "Light on/off" switch on the touchscreen on my pi, or the light switch on the control screen of the web server, it sends "M355 S1" only.  If I manually send M355 S0 it turns off the lights. 

  in Light control - On but not Off Comment by bkey1970 September 2019
• FWIW, if anyone else sees this, and wonders the kit here is what I'm using. https://www.amazon.com/gp/product/B07Q5R6YSK/ref=ppx_yo_dt_b_asin_title_o05_s01

  in "backwards" scrolling with LCD 12864 Graphic Smart Display Comment by bkey1970 August 2019
• Perfect. For this kit, it's 1.  Thank you. 

  in "backwards" scrolling with LCD 12864 Graphic Smart Display Comment by bkey1970 August 2019