Lexan
About
- Username
- Lexan
- Joined
- Visits
- 9
- Last Active
- Roles
- Member
Comments
-
Repetier said: > i set in the pi imager the wifi credentials, ssh aceess, host name and user I never do this, I use the original content. We did not modify this to make it work. We have a own solution to set all this, so maybe that is the…
-
This is the content of the comandline.txt console=tty1 root=PARTUUID=e6dce604-02 rootfstype=ext4 fsck.repair=yes rootwait quiet plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=GB logo.nologo quiet splash plymouth.ignore-serial-consoles sp…
-
Der Fehler entsteht da das Display mit auf dem USB Port "sitzt" und zuhört, aber nichts mit der Kommunikation zwischen RS und dem Mainboard zu tun hat und so nicht versteht was die beiden nun eigentlich vom Display wollen.
-
Anmerkung, Gcodes über das Terminal funktionieren einwandfrei.
-
so far i cant confirm that, i have some x1 sidewinders, if i connect them they try to reach the same port
-
nice!
-
Wenn M500 nicht funktoniert ist es in der Firmware nicht freigegeben. Dann kannst du das als M301 PxxIxxDxxx in den Startcode vom Slicer schreiben
-
Setz mal an den M303 befehl ein U ans ende, dann kannst du es mit M500 im Anschluss direkt speichern und musst die Werte nicht abschreiben
-
was sagt den M503 ?
-
yes, had for now no time to go ahead with that, maybe next week
-
the correction now is much clearer thank you. so i understand it right that i will need always a putty open that rund the gdb untill the system crash ?
-
ah there you go, maybe you can mark this command as a command. For newbies in linux like me there is no way to see in that article that you entered this command to get the PID feedback
-
i have some trouble to finish the step to get the PID of the serve. I now made a clean install with the last image, but i want anyway start the documentation. so before there was no way to find the number, or at least i didnt found the right comman…
-
i will do so after the next crash
-
that were the last lines in the log. you cant control in this status the printers, also cant acess the complete webinterface, only parts. yes im running already on 0.93.0
-
hab extra n marken netzteil mit dem pi4 gekauft, werde mal schauen was das osziloskop sagt
-
der server log scheint nicht zu existieren Die Drucker lassen sich per Display Steuern. Allerdings ist die Termperatur Messung vom Server komplett eingefroren.
-
it starts again, over and over printers are freezing, getting annoing here syslog Read at 14:57 Nov 26 13:45:53 Repetier-Server systemd[1]: Starting Time & Date Service...Nov 26 13:45:53 Repetier-Server dbus-daemon[328]: [system] Successfully …
-
Oh sorry for the wrong section. Thanks the button work also in windows
-
i tried with Firefox, Edge, Chrome, Opera and Vivaldi Browser. When i use Drag and Drop there comes one of the 2 following situations. 1. its not allowed to drop something there 2. The Browser Opens the Gecode directly. I tried the mainframe with …
-
had now 2 sucessfull prints over 5 hours, will keep an eye on it if it happens again
-
checked via putty /var/lib/Repetier-Server/logs/server.log Nothink happend at this time var/log/syslog just shows some time & date service actions, also only from today no days back
-
here i tried to reconnect and hoped to continue with the rescue option 9:18:45.301: M117 Layer 1036/1102 < 9:19:16.303: M117 ETA 09:34:23 day 18 < 9:19:38.280: N608404 M112 < 9:19:49.321: N608405 M105 > 9:19:50.314: JumpToApp0 …
-
no the printer showed still connected. what i just realized, i also not able to start a new print job without reconnect the printer. Edit, found this before: < 23:00:12.011: N608220 G1 X218.207 Y215.904 E3.13490 > 23:00:12.107: ok < …