Hybris

Comments

• Ok, my fault... i thought the switches are to switch the extruder and the heatbed off.  I tested it in your live demo. Everything is fine, and sorry for my inexperience.

  in Temp graphs in the Control section not available Comment by Hybris January 2021
• I solved the problem with a "g90" in the endcode before the bed move foreward. I also checked the old models, where i uploaded to the repetier-server earlier. It looks, that the previous version ignored the "relative position" of the nozzle and the …

  in print limit message too large : Limit x y z Comment by Hybris August 2019
• Hmmm... I checked the manual control settings and the bed size on the server. Everywhere is the correct size configured. I tried another slicer (s3d) and like the prusa slis3r, no limit warnings. I tried some tests tonight and it looks that the prob…

  in print limit message too large : Limit x y z Comment by Hybris August 2019
• For your informartion. I made a test withe the prusaslic3r today. An i get no printer limit warning, with this gcode. Do you see something in my Cura-Startcode, that exceeds the limits? G21 ;metric values G90 ;absolute positioning M82 ;set extruder…

  in print limit message too large : Limit x y z Comment by Hybris August 2019
• Unfortunately, this didn't solve the problem for me. I noticed this behavior since i have upgraded to 0.92.0. Becaused i changed nothing. In the repetier-server settings and in the slicer.

  in print limit message too large : Limit x y z Comment by Hybris July 2019