JAM3D_print_studio
About
- Username
- JAM3D_print_studio
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
When I set the first Filament to extr_multiplier to 1 the second nozzle needs a multiplier of 16 for the same amount of material in the G-code...
-
I mean the delta of each "E"-command
-
Sorry I didn't saw the answer... yes it's the Filament going through the extruder. And it's the same nozzle diameter What I meant by "In the following you can see a part the G-code of the when T1 has a multiplier of 18. T0 is around E=80 and T1 is a…
-
Is there maybe something that I changed what I shouldn't have changed?
-
Is there something I could have changed that I shouldn't have changed?
-
Yes I know, but that's not the problem... I tested the printer with the command:"G1 E100"and it extrudes exacly 100 mm.But when I slice something it uses far to less material. I checked the diameter and the nozzle-diameter...