ibico74
About
- Username
- ibico74
- Joined
- Visits
- 10
- Last Active
- Roles
- Member
Comments
-
I need this also. Using Repetier sever paid version and getting the 2s Pro now
-
Repetier said: Which interface do you want to use? Guess the special touch interface. It will work with any display that pi supports, also it was designed to work also with smaller displays so bigger displays the gain of informations is not t…
-
Tested.. Work great :-)
-
Repetier said: Working already on V20. Already found the reason. boot partition is 40Mb big a sit used to be in the past. Recent kernel package does not fit on that size so updater skipped installing the pi 4 kernel to still fit. So in V20 bo…
-
https://www.dropbox.com/s/sr1ldzuf9hp10ex/Repetier_pi4.png?dl=0 I added printscreen. It is fat32 and I could read it normal. I unzipped it and used BalenaEtcher to make the iso image just like I do when making the raspbian sd. checksum is de910ac…
-
Repetier said: I have it running on pi 4. I think since image 17 we support pi 4, which is the main reason we switched to the new buster raspbian. How far does it come when booting? Any special hardware (display) connected? It just light …
-
I am also looking for this feature. It also might need to home X and Y for a purge after inserting new filament to avoid inperfection on the outer perimeter if the filament run out during outer periment printing. If it print support or infill then t…
-
I get an error that the print would be outside the bed size. Think I done it right when I set the bed size, but probably not. Anyone could share printscreen from the bed size setting?
-
This is something I miss. If I make a user where everything are checked off, I still am able to go places I should not. If I enter the control tab and edit commands I am routed to a settings page. I have a print running now, so I do not want to tes…