WindoAC
About
- Username
- WindoAC
- Joined
- Visits
- 6
- Last Active
- Roles
- Member
Comments
-
I think it won't work if user try to active the printer in this status immediately. And the result will be user not able to enter the command interface to input "#FIRMWARE_RESTART" to reset the printer. I suggest change to not send connectionComman…
-
Great! Looking forward to having this counter value from API. Thanks!
-
1. Those startup gocde won't execute after I reboot the Repetier-Server. It also no any startup gcode execute when deactivate printer and activate it. 2. After I execute those startup gcode manually, deactivate printer and activate can see Repetier…
-
I am using a Due board + RAMPS-FD v2 with Repetier-Firmware version 1.0.3 connect through "Native Port" at baud rate 500000. Connect with "Native Port" won't trigger the board reset. And I am quite sure connectionCommands not sent to printer. But t…
-
Repetier-Firmware M110 N0M105M115M220 S100M221 S100M355G92 E0G90M82G21M114G90M111 S6M360M539 S1@getip I have the same setting found in firmwares/repetier.xml but seem it only execute the @getip. I fallback the version to 0.90.7 and found…
-
I run M115 manually and the print progress resumed. But when I reboot the Regetier-Server, it's has gone again until input M115 again. Seem it missing execule M115 when Regetier-Server connect to the printer.
-
I just upgrade to 0.91.2 and it is same. below is the M115 response. 17:14:35.016: FIRMWARE_NAME:Repetier_1.0.3 COMPILED:Dec 31 2018 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Delta EXTRUDER_COUNT…