flopo

Comments

• Klipper documentation says To flash the board, double tap the board's reset button to enter the # bootloader and then run: make flash FLASH_DEVICE=/dev/ttyACM0 for the Duet.

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• Solved. Works fine. I think need to put command in config to flash the klipper to the board. Some board ex Duet need flash direct....

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• https://github.com/maz0r/klipper_canbus/blob/main/index.md

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• Repetier said: > printer slug is name of the printer wright? Depends on name. You see it in url how it is named if you select one of the printer pages. If you have installed it it is also the only directory in that folder, so should be eas…

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• printer slug is name of the printer wright?

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• ok i will try. Most of the people who use kliper ,special Voron user, have now can bus toolboard. Should made more documentation about that. I think.

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• Ok.Thanks. Which should new comand for this: ~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0 , with repetier server klipper install?

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• If i do a manual klipper install in home/pi.....which connection must use? Serial? which path or.....

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• Repetier said: I tested a reboot and it takes 40-50s depends on pi and sd card speed. Newer images use bullseye and depending on hardware connected some detections may take longer, can't say as is might differ. Especially configured hardw…

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• For il boot time solved. For canbus i used UTOC Mellow USB to CAN. Most comand line changed with new path klipper installation. Old comand: ~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0, for testing can bus uuid. New comand? 

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• So, tried all kind off setting. Canbus not work. Is normal to take 1 min to boot repetier server? Try different sd and take same time to boot. Previous build more faster......

  in Repetier Server Kliper Canbus Comment by flopo November 2022
• Thanks,but i have the printer in 3 different location,and the usb connection is not quite good for me.Is any way to upload the gcode to duet wifi sd card? Or setting up the repetier server to use duet wifi sd card? In this way the printer read the g…

  in Repetier Serever and Duet wifi Comment by flopo August 2018