jyb
electronics engineer retired
and now 3D printer builder
living in Marseilles France
About
- Username
- jyb
- Joined
- Visits
- 25
- Last Active
- Roles
- Member
Comments
-
oops it seems there is an error about webcam connected to a raspberry onto the printer and linked to main computer if printer is on line i get pictures or videos fine but if printer is powered and offline (broken links) i cant get anything did i fo…
-
Mein Gott, ich habe OJRZT statt 0JRZT gelesen !!Ich bin es gewohnt, die Null durchgestrichen zu haben, um sie von dem "O" zu unterscheiden, das mein Fehler ist merci beaucoup !!!
-
a quelle adresse mail puis vous envoyer la copie de ma licence et facture d'achat de licence merci d'avance
-
you said >>To remove a license, go to the Registration tab and simply tap Deactivate. This returns the license until you activate it on any device of your choice.
-
hello after a long shutdown due to covid 19 I try to restart repetier server on raspberry which no longer works and claims the license key. I enter the license key and answer obtained "license server returned an error unknown license OJRZ ..........…
-
hello I seem to have read in your documentation that you can withdraw the license before switching to another raspberry, but I'm not sure. the problem with sd cards is that it is not possible to label them and the error is easy when handling multi…
-
hello repetier another question about license i have a case : i own four raspberry for different uses. One of them ,installed as repetier server , as been loaded with sd card for NAS program by error. Reloading this same raspberry with repetier …
-
ok if i understand that license is embedded on raspberry itself , not on sd card ?
-
thanks a lot !! it runs fine
-
hi i see that new version 0.94.0 is available , i downloaded it ,but one question: does i must type "sudo apt remove modemmanager" before running server ?
-
ok i will do this asap thanks a lot
-
bonjour je suis surpris de voir autant de messages sur ce sujet. j'ai passé quelques jours pour enfin réussir à connecter deux ordinateurs, un chez moi et un dans mon atelier via wifi de chaque côté, à mon imprimante maison avec carte mère "lerdge …
-
HELLO i finally get fine pictures with Chinese usb minicam via raspberry !! now last work i have to do is to move printer on its place on workshop thanks a lot for repetier host and server : finest programs !!
-
bonjour j'ai enfin une bonne connexion stable avec 0.93.1, je peux piloter l'imprimante avec la carte mère lerdge k depuis l'hôte repetier et aussi depuis le serveur repetier. maintenant je cherche à connecter une webcam. je possède un modèle usb c…
-
hello i read this on server left high corner ,in place of chain rings there was the power signal and also on raspberry screen .this is over, it works fine. now i get a stable connexion and i can drive the printer (lerdge k motherboard) from host a…
-
hello ,have you a date for next version 0.94.0 ?
-
oops i made a mistake , you have to read "offline to idle" but is there a difference ?
-
hi actually ,starting repetier-host then opening front server gives "server pro 0.93.1 hypnos 33 no connexion possibility to printer and starting repetier-server using @ip 192.168.1.48 gives server pro 0.93.1 bacchus 15 ,printer blinking from "on l…
-
bonjour après avoir longtemps recherché une solution, j'ai finalement réussi à connecter l'hôte répétiteur au serveur framboise, mais maintenant, de chaque côté (ordinateur / hôte répétiteur et serveur framboise / répéteur), la connexion d'état cl…
-
HELLO i bought a licence on friday 2020/29/05 with dvd.(order n°657250243 digital river) before installing licence, it worked fine ,after licence installed noway to connect repetier host to my printer via pi server, i am sure i misdoing something …
-
as used, i say a very big thanks for your help now i am going to buy and register a license . i hope that will keep stable !! jyb
-
et encore une fois, cela fonctionne bien maintenant mais je ne suis pas sûr de savoir pourquoi !!
-
one more observation. repetier host ,show printer connected, manual control screen, blinking from "idle" to "offline" permanently
-
i look at printer configuration , at bottom of connexion panel there is "firmware values automatic detection .....waiting connection " which is blinking method connection = serial device/port = virtual cartesian is it right ?
-
hi i sent an "M115" command and obtain this 13:45:34.890: FIRMWARE_NAME:Repetier_0.92.6 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:2 REPETIER_PROTOCOL:313:45:34.890: PrinterMo…
-
hi first i must thanks you for your help 1°) below is the response to M115 command 9:42:56.277: FIRMWARE_NAME:Repetier_0.92.6 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:2 R…
-
connect via putty (192.168.1.48:22 static wlan adress) i can login to raspberry and restart by entering "sudo service RepetierServer restart" but no change : no printer move
-
hi i downloaded the more recents files from repetier.server.com and repetier host setup repetier host 2_1_6 repetier server 0.92.3 win32 (not installed) repetier server image 0_92_2_v18 installed on 32Gb cl10 sdhc installing repetier host,i observe…
-
HI i have connected a sdhc card reader to raspberry then start raspberry with raspbian(noobs). On the external card reader i put raspberry repetier server card : in this way i can visit the entire card area. i found "manageWifiAccess" file in really…
-
on ACCES POINT screen, i entered 11 for channel and FRance for country ,never AP (i remember this was the end solution for previous version) host name and ssid let as is . screen WLAN authentication: no encryption, additional adress:none , additio…