timere969
About
- Username
- timere969
- Joined
- Visits
- 20
- Last Active
- Roles
- Member
Comments
-
I've been putting the commands on the server side instead of in the slicer, seems to work pretty well now. My Start Code on the server side is G28 X0 G28 Y0 My End Code is G28 X0 G28 Y0 M140 S0 Had to add the M140 because the heated bed was not…
-
https://www.dropbox.com/s/bpl5lnnsbbb7l3s/PETG-1.75mm-234C-Y_Motor.gcode?dl=0
-
I put it in Dropbox. Who should I address it to.
-
Do you want the GCODE, STL, or LOG?
-
It homes, but does not shut off the heater. Looks like it follows the commands from the server settings, but not from the slicer.
-
I modified the start and end gcode on the server to be G28 X0 G28 Y0 Seems to be working better.
-
; generated by Slic3r 1.2.9 on 2015-09-04 at 19:18:2023; external perimeters extrusion width = 0.40mm4; perimeters extrusion width = 0.67mm5; infill extrusion width = 0.67mm6; solid infill extrusion width = 0.67mm7; top infill extrusion width = 0.67…
-
N1002 G28 X0 < 13:36:35.828: N1003 G28 Y0 > 13:36:35.828: ok 1002 > 13:36:36.677: X:0.00 Y:0.00 Z:0.000 E:0.0000 < 13:36:36.678: N1004 M105 > 13:36:36.678: ok 1003 > 13:36:37.528: X:0.00 Y:0.00 Z:0.000 E:0.0000 < 13:36:37.528: …
-
How do I attach something. It says it is too many characters. I'll try and post the start and end code.