nellson
About
- Username
- nellson
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
OK, something is broken. I re-imaged my SD Card fresh. Added my SSID and License key via the PC's Web Browser. Rebooted. Went into settings on the touch screen, and back out. Works. Manually created my printer only from screenshots. (Marlin, 25000…
-
Tried just restoring Printers and my Printer Definition (not users and settings) and same result.. Corrupted home button.
-
Oh Dear.... New flashed disk, attached to wifi, restored everything from my back up. It brought the issue back :-(
-
Successful install of repetier Monitor, server backed up, got 1.0.2 Raspberry Pi Image. I am off to image a new SD-Card :-D
-
I altered the autostart, no change in behavior. Initial home screen comes up, drop into settings, then hit the HOME button and I get the same two icons, not the full home screen. Meh, rebuild time I guess :-D
-
Ahhh, I have this: pi@Repetier-Server:~$ cat /home/pi/.config/openbox/autostart# Uncomment the following 3 commands to have display always on#xset s off # don't activate screensaver#xset -dpms # disable DPMS (Energy Star) features.#…
-
Going to try updating the raspbian OS underneath.. The following packages will be upgraded: apt apt-transport-https apt-utils base-files bind9-host ca-certificates curl dbus dns-root-data e2fslibs e2fsprogs file gettext-base glib-networking glib-…
-
OK, I did an SSH Port Forward to my PC for 3344, the home page loaded, then I went to SETTINGS. It loaded. Then I hit the HOME icon on the left. It came up with just the two entries, but the Chrome Debugger only showed the Fav.icon accessed, nothing…
-
And I only have me as a user, it's a dedicated controller for my CNC Mill. (MPCNC) So starting over is not the end of the world if it went south.
-
I used the UPDATE inside of Repetier to do the upgrade. Hrmm.. trying to figure out how to call that page from onboard the Pi, It's embedded into my CNC Mill control box. (And it is protected from external access on port 3344) I will need to take…
-
OK, so I think I fixed it properly... I had thought I needed to use the lightdm and use B4 autologin to desktop, but while that worked it left the xinit cursur on, and i had to load lightdm which I had never used.. so I thought maybe since it works …
-
Did you get this working? I have this setup working and would be happy to help.. though I suspect I know you from the MPCNC FB Group and may of helped you already? :-D
-
I use Repetier Host for my CNC Router (MPCNC) and would like to use the directional buttons on my joystick / Keyboard to jog. Even having assignable hot Key events that can detect game control events as assignable input would allow us to pick h…