exploid
About
- Username
- exploid
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
ok i found the problem the solution is i pick the wrong Printer config
-
the Startcode is still : ;Generated with Cura_SteamEngine 15.01; Default start codeG28 ; Home extruderG29 ; Autobed LevelingG1 Z25 F100M107 ; Turn off fanG90 ; Absolute positioningM82 ; Extruder in absolute modeM190 S50; Activate all used extruderM…
-
i have do that wait i show you some screenshots
-
ok how i can change or fix that
-
T1 parts are missing ;Generated with Cura_SteamEngine 15.01; Default start codeG28 ; Home extruderG29 ; Autobed LevelingG1 Z25 F100M107 ; Turn off fanG90 ; Absolute positioningM82 ; Extruder in absolute modeM190 S50; Activate all used extruderM104 …
-
now i got an other problem, if i slice with 2 extruders like this picture on top and want to print repetier dont heat the secound extruder ; Default start codeG28 ; Home extruderG1 Z15 F{Z_TRAVEL_SPEED}M107 ; Turn off fanG90 ; Absolute position…
-
ok now i have found it thank you
-
can i deactivate it ?