TimTaler
About
- Username
- TimTaler
- Joined
- Visits
- 6
- Last Active
- Roles
- Member
Comments
-
Danke für die schnelle Hilfe und die ausführliche Erklärung!
-
Ich hatte noch eine angepasste Anycubic firmware.xml genutzt. Darin lag wohl das Problem und bis 0.93.1 druckte auch der 4Max ohne Probleme damit. Die Anpassung musste damals (2018) für die Anycubic i3 Firmware 1.4 gemacht werden. Sonst funktioniert…
-
remedien said: OK, habe es gelöst: in der Druckeinstellung die Firmware auf CBD/ZWLF Workaround ändern. Dann läuft es wieder. Test jetzt den Druck und hoffe, dass auch das funktioniert Das scheint zu stimmen. Danke für den Hinweis! Ich ha…
-
Ich verstehe nicht genau was mit dem "connected.log" gemeint ist aber ich habe mal für die Konsole "Befehle" und "Bestätigung" aktiviert. Der M105-Filter war schon aktiviert. Kann man mit diesen Informationen etwas anfangen? Ich sehe nur eine Merkwü…
-
This screenshot is the german UI. you can find this option in printer settings and at the lower end of the page.
-
If you have an anycubic i3 Mega with Firmware 1.1.x you can use reptier server without step 9-16 (install-guide above) but if you have a new model with 32bit Gorilla board and Firmware 1.4.x you have to flash the firmware and configure reptier serve…
-
Solution guide to get the Anycubic i3 Mega work with Repetier Server on a Raspberry (new version - Ultrabase - no Auto-Level - Fw 1.4.x) check the current firmware version. It should be 1.4.0RC23/P3 - This is means you have the latest Version with …
-
Repetier said: Ok, first you can copy marlin.xml and then in server you have another firmware to select from. This is bette rif you have other printers working well. Your log ends where it gets interesting. Looks like it did not like how M11…
-
Repetier said: Server has firmware definitions in installdir/firmwares. If that version still has the wait bug you should remove ^wait$I also noticed in octoprint thread that line acknowledgements are also wrong (or at least in a new format n…
-
After more research I found the solution. One user of the octopi github got a new firmware version from Anycubic. In this version they set the baudrate to 115200. This works with Repetier Server on a Raspi too! 1. first you have to check the curren…
-
I can confirm the statement from Max: "Anycubic i3 Mega works on Windows with Repetier Host or Server". And I try to find the difference to the Raspberry Repetier Server. Could it be possible, that the Raspberry Image did not contain the driver for…
-
RAyWB said: seems to be modified Marlin FW https://3ddruckerforum.blogspot.de/2016/12/vorinstallierte-firmware.htm This seems to be another Anycubic model. The i3 Mega was released 2017 and it have a touchscreen and Anycubic uses a close…
-
Same problem here with Repetier Server Pro. Got my Anycubic i3 Mega today and could not use it Repetier Server on a raspi.The connection is established (green icon) but it transfer no useful data. It was required to set the bus speed to 56000 and se…