max
About
- Username
- max
- Joined
- Visits
- 2
- Last Active
- Roles
- Member
Comments
-
Repetier said: It's the gcode you send. See this showing the problem 8:50:00.683: Resend:5588:50:00.683: Resend after 126ms8:50:00.695: ok8:50:00.695: //last:557 curr:571 rcv:N571 G1 F750 X39.058 Y29.834 E0.01261*508:50:00.695: 38:50:00.695:…
-
Hi, Sometimes it worked to print with Repetier Server, but sometimes- like this morning, he doesn't start printing. Here's the console output: https://pastebin.com/7WYxamJb
-
TimTaler said: Solution guide to get the Anycubic i3 Mega work with Repetier Server on a Raspberry (new version - Ultrabase - no Auto-Level - Fw 1.4.x) check the current firmware version. It should be 1.4.0RC23/P3 - This is means you have th…
-
TimTaler said: Repetier said: Server has firmware definitions in installdir/firmwares. If that version still has the wait bug you should remove ^wait$I also noticed in octoprint thread that line acknowledgements are also wrong (or at l…
-
Yes, I've used the right port. And I also think the reason are the M105 commands, the seller wrote that some commands like M105 are not working... Any Idea how to fix this?