3dGenie
About
- Username
- 3dGenie
- Joined
- Visits
- 8
- Last Active
- Roles
- Member
Comments
-
Thx, worked
-
To be more prrecise, since other users of this board also seem to have had this problem: in pins_MKS_BASE_14.h:```#define FAN_PIN 9 ``` in pins_MKS_BASE_common.h:``` #define MOSFET_D_PIN 8``…
-
Done that, works now
-
I first thought this was the solution but I've tried it and the second extruder still won't heat up
-
Hallo nochmal. Sorry wg der späten Antwort. Ich habe den A10M zwar noch nicht wieder hinbekommen, hatte jetzt aber beim TEVO dasselbe Problem, dass der Server Service beim Versuch, sich mit dem Drucker zu verbinden, in einer Schleife hängenblieb und…
-
Windows. Das mit Virtual Cartesian probiere ich, sobald der Bootloader wieder funktioniert. Den hat Cura zerschossen, oder ich hab die falsche Firmware erwischt.
-
I'll take a closer look into this. As soon as the next spool is getting empty.
-
I have the same problem running Repetier Host Mac 1.1.0 and Slic3r PE 1.41.0+. The sclicer pane in Repetier Host doesn't show any settings, when I click on "Slice with Slic3r" I get an error saying "Slicing exited with error!" but I can start the st…
-
Since Repetier Host is in version 2 for PC and still in version 1 for Mac, which software would you recommend using until you have succeeded in closing the gap between PC and Mac versions?
-
Okay, thx. Got it mixed up with Marlin ^^
-
samezrp said: Always check endstops. Only enable if you have no cross talk from your motors, which could trigger wrong signals causing the print to skew. (ALWAYS_CHECK_ENDSTOPS) What do you mean with cross talk from motors? Repetier …
-
I'm also waiting for the new Mac version. It's pointless to let Repetier Host and Server run in a Windows VM that makes updates and restarts whenever it wants to. Please supply further information if and when the new Mac version will be released. I…