mebj
About
- Username
- mebj
- Joined
- Visits
- 17
- Last Active
- Roles
- Member
Comments
-
I updated the entire system yesterday before update of Repetier Server. I also removed Firefox and reinstalled it again because of the blank screen problem. An Apt search shows version 52.9.0 which is very old by now so it seems that the RPi reposit…
-
Repetier said: You need to download 2.2.0 by replacing version in download path. New release is still in testing phase so last official version will not work. Many thanks. Any time frame for the official version (if it is close I will n…
-
Repetier said: Ok found the bug. Unfortunately it is in Repetier-Host and not in the server. Host thinks 1.0.1 is older than 0.75.0 so does not assume groups exist at all. Good thing is we are working to release host update next when Prusa Sl…
-
When checking the eeprom values I found that these were not correct at all for max speed and homing speed. I do not know what happened because values were not in line with any value I ever did set nor the "standard" values coming from the config too…
-
Repetier said: Please check also eeprom. There the max. speed for z is stored as well as z homing speed. Changing in configuration.h is not enough. Thank's, that might be the root of the problem. I have changed the eeprom param between tr…
-
Roko said: "Still I can not see any logic in that speed changes when using different settings of steps/mm." It seems to me that, If it moves 1 mm in 400 steps and is changed to 1 mm in 1600 steps it would have to turn 4 times faster at any g…
-
Glad to hear that speed could be OK at 400 steps/mm, remains to find the reason why mine behaves differently.Speed seems to be the same/similar whether movement initiated from controller, from host buttons or with a G-command.I already have tried ch…