joerib
About
- Username
- joerib
- Joined
- Visits
- 26
- Last Active
- Roles
- Member
Comments
-
Any progress on this one?
-
To get the problem solved I have bought an mk3. Works perfectly...
-
Ran the update again but I still get the same error: 21:52:11.403: Error:Line Number is not Last Line Number+1, Last Line: 021:52:11.403: Resend: 1 Back to Octo again, where can I get my re-fund?
-
Updared last week, will flash tonight again and keep you posted.
-
So the error is fixed by repetier? Do I need to download an update?
-
I have stepped to octo print for now. Can I expect as paying customer a fix for this?
-
Any solution yet?
-
Repetier said: If firmware responds with ok it accepted the g code and should do what it is supposed to do with the gcode. If it does not wait with M109 it is a firmware issue as firmware is responsible to wait until temp. is reached. You co…
-
Thanks, I already tried this. And, again if I use octoprint there are no problems at all.
-
And that is not happening, the printer is starting with a cold nozzle and bed. I have the feeling that Repetier is not ''talking'' correctly with the printer. Perhaps a crash in firmware??
-
From the g-code (standard) ; GCode generated by CraftWare M190 S70 ;set bed temp (wait)M109 S245 ;set head temp (wait)
-
Repetier said: Do you have communication with firmware at all? Same gcode should have same effect as it only gets send to printer. Yes there is communication but as an example, the Craftbot is hanging during printing in the first layer and…
-
Repetier said: What firmware is the printer running? The last one: 11542 Repetier server and the combination with a Craftbot 2 are NOT working. Does not seems to make a difference which slicer I use. The uploaded G-code to Repetier serve…
-
After 3 days of fooling around it is time to give up. Final conclusion: Repetier server and the combination with a Craftbot 2 are NOT working. Does not seems to make a difference which slicer I use. The uploaded G-code to Repetier server is not sen…