› ›

topedesigns

About

Username
topedesigns
Joined
Visits
18
Last Active
Roles
Member

Comments

  • I had no clue about this file, now I'm using 152.0000 and the first layer came out very nice and the rest also, even the scratch went away. With Delta's come out with Smoothie (TEVO moster) this way is good and simple. Thanks for your help and keep…
    in Overextruding Comment by topedesigns July 2017
  • The changes only take efect in the file config-override (can't see the extension, opened with sublime text), config.txt is just an example I think. sorry my bad ... ";E Steps per mm: M92 E163.0000 P57988" is a line in the file config-override. Tha…
    in Overextruding Comment by topedesigns July 2017
  • On config-override from M92 E163.0000 P57988 to  M92 E156.0000 P57988
    in Overextruding Comment by topedesigns July 2017
  • Many thanks is a config.txt ! Everething is there, ufffffffffff. My problem was that, start from the beginning where 100 is 100 and then go further down the road. About the flowrate I've tested 1 by 1 (increasing/decreasing) and was too mutch or too…
    in Overextruding Comment by topedesigns July 2017
  • 22:12:02.736 : N223043 M115*1822:12:02.736 : ok22:12:02.737 : ok22:12:03.926 : N223044 M105*20 G-Code : M115 (SEND) the board is eMotronic Smoothieboard : Uberclock, LLC (http://uberclock.com)https://www.reprap-3d-printer.com/product/1234568619-mi…
    in Overextruding Comment by topedesigns July 2017
  • MartinH ...    
    in Overextruding Comment by topedesigns July 2017
  • Can you explain me how can I extrude 100mm instead of 104mm ? 
    in Overextruding Comment by topedesigns July 2017