vince_007
About
- Username
- vince_007
- Joined
- Visits
- 53
- Last Active
- Roles
- Member
Comments
-
After a crash, it is impossible to reconnect, you have to restart the PI. The right path for the log is "/var/lib/Repetier-Server/logs" not "/var/log/server.log" In server log, i have only this lines: 2018-03-19 18:15:47: Closing websocket for mis…
-
If i add :3344 at the end of IP adresse, i can stay connected to the phone or tablet without WiFi crashes. The problem must come from nginx ?
-
The server.log file does not exist in this location. I have syslog file but not server.log
-
The Pi is connected to my local Wifi network, IP: 192.168.1.99 Where is the server.log file ? I have other Pi connected to the WiFi that have no WiFi problem. I do not think it comes from Linux network management.
-
Hello, I have exactly the same problem. The server continues to operate normally but WiFi has disconnected. And it is impossible to reconnect without restarting the Pi. I uses Repetier Server Pro 0.86.2 with Repetier Firmware 1.0.2. With a comput…
-
My Z travel is 350mm at 40mm/s, in my example, z movement during ~10sec.
-
When i do a little move on z axis, i have no problem ! But the temperature change a little on lcd display. Axis X and Y are very fast (400mm/s) than z Axis (40mm/s), when i do a move on X or Y axis, the result as same as a little Z move, all temper…
-
Arduino indicates 3510 bytes (42%) used for globale data and 4682 bytes of free for local data. I think it's more of a pointer overflow. My printer is cartesian type.
-
The log because attachment file does not work ! 18:52:27.498 : wait18:52:27.498 : ok 2818:52:27.528 : T:27.68 /0 B:24.03 /0 B@:0 @:0 T0:27.68 /0 @0:0 T1:25.00 /0 @1:018:52:28.498 : wait18:52:28.498 : ok 2918:52:28.528 : T:27.80 /0 B:24.17 /0 B@:0 …
-
I'm sorry, my English is not very good. G32 works well the error does not appear during this command but after the auto level enable and only when Z move. If I never activate the auto level, I never have a probe temperature problem, that is strang…
-
This is not a hardware problem ! The temperature values are -20°c during Z movement. The test is very simple, if i desactive "auto leveling" from LCD menu of pibot card and i move Z axis, i have no problem. If i enable "auto leveling" from LCD me…
-
When i move Z axis with G0 or by HMI on repetier Server, i can see the temperature changed on the Pibot LCD. The temperature graphic on repetier Server or Repetier host show the temperature problem (ramdom values). All temperature values are impacte…
-
Hello, I solved the problem by changing the bootloader by "stk500boot_v2_mega2560.hex", the original bootloader of Arduino. I use an Atmel JTAGICE MKII probe to program the 2560 processor. I no longer have a download error with SD Card Enable and E…
-
Hello, If i disable the SD Card support, the firmware with FEATURE_Z_PROBE = 1 can be uploaded successfull ! Is it a memory space problem ? With SD Card disable an Z_Probe enable the occuped memory is 43%. But if i enable both functions, the occu…
-
I'm Ok with you but if i disable z probe (FEATURE_Z_PROBE = 0) upload firmware works well at the first time. I don't understand the relation between FEATURE_Z_PROBE = 1 and error at the end of upload process. It is always byte 0 in error !
-
Hello, I have buy a Picam 2 and its works very well and out of the box ! For a long cable i use this version: https://www.tindie.com/products/freto/pi-camera-hdmi-cable-extension/ Thanks a lot for your support.
-
I have tried to modify mjpgStart without solved the problem. I will buy a PiCAM, it is a good idea ? What is the best webcam for compatibility with Repetier Server and cost saving ? Thanks.