› ›

pistaxo

About

Username
pistaxo
Joined
Visits
44
Last Active
Roles
Member

Comments

  • UPDATE: Now printer seems is working fine except for one issue: skipping steps. I set the maximum current though the drivers (cannot go further), the only thing I have in mind regarding to the problem is the speed. Are lower speeds significantly bet…
    in XYZ motors not moving when printing Comment by pistaxo May 2017
  • MartinH said: Just wondering...... What type of extruder are you using to have 164k steps/mm "echo:  M92 X35.56 Y35.56 Z35.56 E164266.67" Is a clay extruder of 90mm in diam through a nozzle of 1.4 (that's why that huge number). Anyway…
    in XYZ motors not moving when printing Comment by pistaxo May 2017
  • I have changed the values from firmware (also from repetier) but still doing weird things when homing. Is like if just goes few centimeters up looking for the end stoppers but never find them. Was working some days ago but now, randomly, doesn't wor…
    in XYZ motors not moving when printing Comment by pistaxo May 2017
  • Hi, I kind of solve the problem, it seem it was some mistake in the steps/mm conversion. The issue I'm having now is that I've been trying to adjust the height to print in the build plate (and not in the "air"), but when homing it just go slightly b…
    in XYZ motors not moving when printing Comment by pistaxo May 2017
  • Yes, it seems that the problem is with the extruder motor shaking and vibrations. I have changed and tried other accelerations but didnt get any thing in clear. Which are the normal values of acceleration and feedrate? Now I realised that the XYZ sl…
    in XYZ motors not moving when printing Comment by pistaxo May 2017
  • Here is the echo I get when printing (ack is enabled): 11:13:39.685 : X:0.00 Y:0.00 Z:250.00 E:0.00 Count X:24484 Y:24484 Z:2448411:13:39.685 : ok11:13:39.685 : echo:N14 G1 Z15 F0*5311:13:39.685 : ok11:13:39.685 : echo:N15 M107*1711:13:39.685 : N22…
    in XYZ motors not moving when printing Comment by pistaxo May 2017
  • Hi, I checked the echo option. When the print is running (but not moving) I dont have any message in the box like "echo: .....". Just when I stop the print I got some Echo messages regarding to PID values, Max acceleration, Endstops ajustments... I …
    in XYZ motors not moving when printing Comment by pistaxo May 2017
  • Endstops are not triggered. About the echo, ill figure out how to enable it and let know.Think updating the firmware could be an option? (latest one didn't work properly, but can try one in between) Or is not worth it?
    in XYZ motors not moving when printing Comment by pistaxo May 2017