› ›

btmerz

Tronxy X3

About

Username
btmerz
Joined
Visits
52
Last Active
Roles
Member

Comments

  • Thank you for the fast reply.
    in Repetier Host Cura 2.6 Comment by btmerz July 2017
  • Ok. Thank you for your kind support. Best regards
    in Failed installation on OrangePi PC Comment by btmerz June 2017
  • Sorry, but all that doesn't help. As I am logged in as root the chown doesn't change anything. All files in /var/lib/Repetier-Server belor to user root:root. I guess that the problem is, that I cant't use another user on my system. See the following…
    in Failed installation on OrangePi PC Comment by btmerz June 2017
  • Hi, sudo is already installed: "root@orangepi:~# apt-get install sudo Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig sudo ist schon die neueste Version (sudo is the newest vers…
    in Failed installation on OrangePi PC Comment by btmerz June 2017
  • When I type /usr/local/Repetier-Server/bin/RepetierServer -c /usr/local/Repetier-Server/etc/RepetierServer.xml the server starts and I have access from my laptop, which is great. But the server doesn start automaticaly after a reboot of the orangepi…
    in Failed installation on OrangePi PC Comment by btmerz June 2017
  • One additional question befor I test you commands: Which Linux version do I have to download? I used the armel version. Is that the correct one? I saw in a youtube tutorial that he used the armhf version!?
    in Failed installation on OrangePi PC Comment by btmerz June 2017
  • Hello, /var/lib/syslog is not available. Also  /var/lib/RepetierServer/log/ is empty. So no further information here... root@orangepi:~# dpkg -i Repetier-Server-0.80.3-Linux.deb Vormals nicht ausgewähltes Paket repetier-server wird gewählt.(Lese Da…
    in Failed installation on OrangePi PC Comment by btmerz June 2017
  • OK. Now I have found my error. My homing order was set to ZXYTZ. I thouhgt it was already set to XYTZ. I will give it a test.
    in Z probe problem Tronxy X3 Comment by btmerz June 2017
  • My problem is that when the printhead is somewhere near the home position and I send G28 it only moves some mm in X and then tries to probe Z but the sensor is not over the bed and so the head crashes into the bed!
    in Z probe problem Tronxy X3 Comment by btmerz June 2017
  • Ok. With MIN_HARDWARE_ENDSTOP_Z true it works better. One problem I have now is that when the printhead is in the X endstop and I try to home it doesn't move enough to get the sensor positioned over the bed and the Z-Axis crashes. Currently I home X…
    in Z probe problem Tronxy X3 Comment by btmerz May 2017
  • Ok. Meanwhile I have my RAMPS board connected and running with the dev. Firmware. So far so good. But how do I initialize now my printer? What commands do I have to send before printing? Does MIN_HARDWARE_ENDSTOP_Z to be true or false? I have MIN_HA…
    in Z probe problem Tronxy X3 Comment by btmerz May 2017
  • As I am very limited with the melzi board I decided to buy a RAMPS 1.4 board with a smart graphics LCD. So as soon as it is running I will test the new version and your proposals. Thank you...
    in Z probe problem Tronxy X3 Comment by btmerz May 2017
  • So that means that it only works in the dev. version. Unfortunately I can't compile that version because of memory restrictions on my melzi board  !?
    in Z probe problem Tronxy X3 Comment by btmerz May 2017
  • Ok. And how does the sat code look like for this solution ?
    in Z probe problem Tronxy X3 Comment by btmerz May 2017
  • If I understand right that means that I need a Z max Endstop? Currently I have a Mali board which didn't support that. So is it possible with only the Z probe?
    in Z probe problem Tronxy X3 Comment by btmerz May 2017