azurha

Comments

• Hi o/ I use the version 0.92.9 and i have #define UI_BED_COATING 1What is this parameter ?

  in Auto level - Prints about 10mm above bed. Comment by azurha March 2017
• it was set on 20 !Now i set at 0, but i still the same problem, the nozzle up for ~10mm above the bed

  in Auto level - Prints about 10mm above bed. Comment by azurha March 2017
• I have exactly the same problem.

  in Auto level - Prints about 10mm above bed. Comment by azurha March 2017