dtgamer99
About
- Username
- dtgamer99
- Joined
- Visits
- 5
- Last Active
- Roles
- Member
Comments
-
Thanks Repetier guy! It was indeed the path. I changed it to repetier console and viola! Back in business. Thanks,Happy camper.
-
I didn't modify it. I just ran the update and the moment I clicked "slice with slic3r" I get that graphic window. I have windows 7 64bit. I'll look at the path and date directory tonight to see where it leads.P.S. Thanks for answering my plea for…
-
Sorry for the long delay in responding. Z Length of 198 was the magic number. Everything has fallen into place and I'm very happy.Thanks Support!
-
I changed my Z max length to 198 and that did the trick. My nozzle matches up well with my software. Thanks so much!
-
Understood! I'll check tonight. Thanks again, you guys are incredible. Or you as a guy.. umm. thanks.
-
Morning!I am not sure if the Da Vinci has Z Max Homing. So if I shorten my Z Max Length it will bring the nozzle down? In my printer settings I have Endstop = off. Not sure if that means anything.Thanks a bunch.
-
I have this set for my machine. Shouldn't my YXZ be 200x200x200 for the bed?And what should I enter for the Z max back on home? Some thing like Z_MAX_LENGTH 199? #if DAVINCI==1#if MODEL==0#define Y_MAX_LENGTH 217 - ENDSTOP_Y_BACK_ON_HOME#else#defi…
-
I don't know. What if I tell you that when I drop the nozzle down to Z0 I just move the nozzle around and adjust my 3 bed screws? I don't enter any new values in software or anything. But this is what I have been doing when I Manual Level or send…
-
Good morning,I have this same exact problem. After I run Manual leveling and start a print, the nozzle is too high for the filament to stick to the bed. This happened after I flashed over to 92.10. Why is this happening? I try to correct this by…