shadowtec
About
- Username
- shadowtec
- Joined
- Visits
- 2
- Last Active
- Roles
- Member
Comments
-
... That's a good idea. I try it on monday (my next chance to work on it) I work with serial all of the time. I reckon it will be something simple I let you know how I go
-
After a few tests I did get it to respond once to a ,119 command then the ramps board gave up accepting commands I am wondering if I have a 'few' bad BT modules or even a bad BT dongle connected to the pi. I tried a couple of other BT modules for …
-
I think I am starting to narrow it down... When I hook the BT module to a FTDI (serial to usb) which is turn connected to my PC. this is the result I get from the PI It looks like in one direction it is running fine but the other is at the worng…
-
I think there is junk coming from my Pi because when I redirect the printer to a different port, I still see stuff on my LA when I should be seeing nothing. When the server is not looking at /dev/rfcomm0 I see a 'wait' command coming from the from t…
-
If it is any help I have posted the Configuration.h file. It was created with the firmware tool so I don't think there is anything funny. I do see data from the Y_Min pin on the Ramps
-
Thanks for the response. After a little sleep I now understand better. I chose option A (serial 3) and also checked my BT module (which I have confirmed is at 115200 8,n,1) now when I hook it up I am getting this on the gcode window and I am gettin…
-
Note: I should of proof read the subject line (was very early in the morning :P )