ex-egll
About
- Username
- ex-egll
- Joined
- Visits
- 3
- Last Active
- Roles
- Member
Comments
-
Thanks Repetier, Just tried the Dev version and it works perfectly with the Servo. Now to continue exploring the progremme.
-
Thanks for the response Repetier. Adding R to the script makes sense ....as does the G4 command. Is there any reason the code only supports a fixed z-min endstop and not a servo mounted one? Thanks
-
Summary to date: Z_PROBE_START_SCRIPT "M340 P0 S2125"Z_PROBE_FINISHED_SCRIPT "M340 P0 S1000" G28 Homes X and Y correctly but does NOT deploy servo to lower the Z Probe. If Z probe is triggered manually it appears to work correctly. G29 Works co…
-
OK, found one problem which I had hoped would solve the problem, but no luck. I had the M340 code parameters the wrong way round (in my mind P was for Pulse length and S was for Servo), alas logic let me down again. I have now rewritten Probe start…
-
Forgot to add, any commands from the Repetier Host software in the form of M401/M402 or M340 S0 P2125 does nothing G32 S0 will start the Z axis moving down, but afain no servo deployment
-
Thanks, I went there originally but didn't dig deep enough! Understood about using the config tool, that was my plan, I just wanted to get a better understanding of the parameters. ex-egll