BlueRav3n
About
- Username
- BlueRav3n
- Joined
- Visits
- 2
- Last Active
- Roles
- Member
Comments
-
Okay Thanks
-
there is not much change i can give it because if i change it to 0 to 1 it will select the heat bed, the only thing i changed was the type of temp sensor.type of board i use for the davinci 1.0 is arduino due, type of board my davinci has is the new…
-
what do you mean by hooked to T0 terminals? the lcd screen just says def / 0[] 30/
-
Okay changed it but there is a new problem as soon as i turn the printer on it says on the interface "Def / 0[] 30/"this is the code i used #define EXT0_TEMPSENSOR_TYPE 1// Analog input pin for reading temperatures or pin enabling SS for MAX6675…
-
i am really sorry i am confused, Okay let me recap so the problem with my printer is the thermistor pin is incorrectly configured and i need to go to the tools section to select the thermistor to the extruder. The only thing i am confused is that ar…
-
sorry i am a newbie to this software so i have a slight problem i found the tools section repetier-host but i don't see where you set the thermistor pin all i see is Belt calculator , Leadscrew caluculator , and Bed height map.
-
Forgive me if i am incorrect but this is done on arduino Configuration.halso if you could can you tell me which section i am supposed to modify
-
so is this a psychical error or firmware error and how do i fix it?
-
that it gave*
-
Okay Just tested it, so the heat bed heated up just fine no errors but when i tried the extruder the reading on the heat kept changing to 28 29 after a bit of that i gave me the error m999.
-
okay here is the error log of me trying to print something PS: not sure how to see if i mixed it up12:29:28.807 : FIRMWARE_NAME:Repetier_0.92.10 FIRMWARE_URL:https://github.com/luc-github/Repetier-Firmware-0.92/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:DaV…