› ›

Nazza

About

Username
Nazza
Joined
Visits
3
Last Active
Roles
Member

Comments

  • two different SD cards, two different RPi's, and a NUC all showed up with this same error... I really do not know what to think. Anyway, yes, I'm always using the programming port of the Due. Now that I installed repetier firmware v0.92 stable on th…
    in Server hangs after some time Comment by Nazza April 2017
  • Ok, the problem persists. After a minute or so of pause during print it still hangs, I've set the printer under a Repetier Server installation on a Intel NUC I had on another printer, and it still hangs. So maybe it's the Arduino DUE clone I'm using…
    in Server hangs after some time Comment by Nazza April 2017
  • Hello, it did not help. But I did try another thing: using the old SD card with OctoPrint and just by using it some minutes I got connection issues: no temperature reading, no command response: I'm guessing it's something serial-port related.. So I …
    in Server hangs after some time Comment by Nazza April 2017
  • Thanks for the follow-up, unfortunately there's no webcam connected, configuration is set to "no webcam" and the whole thing is connected via ethernet cable. At least I've got some log files: even though, whenever I reset via ssh, I get a new connec…
    in Server hangs after some time Comment by Nazza April 2017
  • Hello there, sorry for replying this late, I was trying all the remaining things to check. Yes, I mean both pausing the print for some minutes (let's say change a spool) and letting it be idle after a print. I'm using Repetier Firmware 1.0.0 dev. v…
    in Server hangs after some time Comment by Nazza April 2017
  • Ok, it went stuck again, but this time we've got new information that could be useful. I paused the print for some hours and before I paused it everything was going smoothly (cpu usage between 3% and 9%). After some hours I've seen the server at 104…
    in Server hangs after some time Comment by Nazza April 2017
  • Hello there! I've started the troubleshooting process by disabling the graphical interface from raspi-config, wich I didn't know was enabled since I got no hdmi monitor attached to it. After doing so, the chromium process never started again and th…
    in Server hangs after some time Comment by Nazza April 2017
  • Hello and thanks for the reply! No, I've got no touchscreen, not even a display on the RADDS. Gonna disable it right now. About the logs: yes, I kept the switches "commands" and "ACK" enabled on the web interface to see what was going on and they wo…
    in Server hangs after some time Comment by Nazza April 2017