NiklasO
About
- Username
- NiklasO
- Joined
- Visits
- 11
- Last Active
- Roles
- Member
Comments
-
Yes please! ^:)^
-
Yes, 0.80.3 and it still moves when using the reset button on the printer. Not all the time but too many to be ok. It starts moving slow diagonally towards back right when it happens. That's why I wan't easy access to software emergency stop. Edit: …
-
Latest Marlin RCBugFix and the bord is GT2560 (using the Ultimaker pin definition).It works when connected by USB but not host -> server. The emergency stop also works from the web gui but sometimes it takes time to get to the option. Too long ti…
-
I would like to add one thing while talking about time. Could the time and date setting follow the system set locale?Like recordings show "Dec 28, 2016 05:00:00 AM. I would like 24h clock and date as 28 dec 2016. Maybe this could be set by some cust…
-
I turned off shadows and reflections and still getting the black lines. I did not see them before because I used black filament. ;-)
-
I sure hope it will help. I tried OctoPrint in desperation here but didn't like it. Why did I get all that in the log when the printer was still heating? (image in earlier post, https://drive.google.com/file/d/0B13H1MftDH4lNDl5aEdMSEtsWnM/view).When…
-
I mean that they differ quite a bit? Much more black and lines in the server rendered one?
-
Well, I started to print from the webgui instead (to see if host was the problem). Uploaded file. It worked for some prints but now it just started to suddenly show the printer as deactivated while heating again. :-(
-
It did this while the extruder was heating after a fresh reboot I did moments ago (I just started the print):https://drive.google.com/file/d/0B13H1MftDH4lNDl5aEdMSEtsWnM/view?usp=sharingWhen the set temperature was met, it moved the X-axis in the wr…
-
I use a "no name" cheap webcam...But now I have had like 10 prints after each other without problem. It just happens but now I restart the Pi after powering on the ports and the printer..
-
Thanks! If I disable power as in my scripts it shows up red and disconnected. When I apply power again the printer goes yellow and then green. Not always. Sometimes it stays white and I have to press Activate at least twice. Three-four times often.
-
Hmm, it could be because I kill the power to the usb-ports from the command I talk about here:https://forum.repetier.com/discussion/comment/9981/#Comment_9981 The LCD screen (and LED in BLTouch) stays on if the Pi is running so using that would turn…
-
I have to press "Activate" at least twice (or more) for the printer to become green again. I changed usb-port and the cable now, same thing. First print usually works but not the 2nd one. It starts heating and then just stops as before. No reset, no…
-
No, it goes to.. no color. Like when the printer is deactivated. And yes, printer still there in /dev
-
Now it did it first print. Connected-log is empty. Print log just stops:> 21:39:30.670: T:209.4 /210.0 B:65.0 /65.0 @:65 B@:108 W:6 > 21:39:31.670: T:209.5 /210.0 B:65.0 /65.0 @:65 B@:110 W:5 > 21:39:32.670: T:209.6 /210.0 B:65.0 /65.0 @…
-
I can provide logs. The first print always works. The second one does not. Disconnects acting on USB will be seen in dmesg.
-
No disconnects. dmesg looks good.
-
I also have problems after upgrading to 0.80.2. I can print ONE print using Repetier-Host. The following prints will start heating and then fail. Printer needs to be activated several times before it accepts that the printer is there. I also have ha…
-
So the button has no use in repetier-host when connected to the server? Why is it there? Could it be optional? My printer has a reset button but I'm not always at the printer (using webcam).
-
I think that emergency stop should be more accessible. Now, it needs some clicks to trigger it (in the web gui) and the emergency stop in Repetier-Host does nothing when connected via the server.
-
I also had it happen to me. Running 0.80.1 Pro.
-
Ok thanks, I will look in to it. By profile I mean the profile here on the forum.
-
Thanks! I used the Raspberry Pi image v4 so I haven't touched mjpg_streamer. Edit: My profile tells me that my location is Norway? It's Sweden and I can't find where to change it..
-
Note: I am running Repetier-Server Pro on Raspberry Pi 2 Model B. I have my printer connected to a Z-wave breaker and I can turn on and off my printer by calling the Domoticz API (Domoticz running on other Pi 3) using curl or wget. My printer does n…