bartleeanderson
About
- Username
- bartleeanderson
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
Thanks so much. I used two separate power supplies. One for the bed and one for the extruder. That did the trick. I have more tuning to do but it didn't stop anymore!
-
Excellent, that sounds like something I can look into. I appreciate your patience.
-
Sorry I didn't understand at first what you meant about the extruder output. Here are all of the graphs. The output and the slicer gcode are here gcode I thought that I mentioned previously that the same thing happens when preheating manually befo…
-
I disabled cooling, I don't have a fan connected here is the output, similar to previous https://gyazo.com/40294d5eb3a95574254c1330e1b9e8e1I realized that it tops off before reaching the desired temperature but I don't know what causes that. Manuall…
-
https://gyazo.com/0f348cfd17a10698548560a501086e30 didn't see image after posting, here is link
-
Here is some more info related to the issue:I get the Error message after the heater has been turned off 19:53:43.785 : DebugLevel:14 19:53:43.797 : Error:One heater seems decoupled from thermistor - disabling all for safety! 19:53:43.798 : Error:Te…
-
Thanks much!I changed the Z-axis acceleration and Z-axis travel acceleration from 100 to 10 first and then to 80In both cases the motors worked correctly. Appreciate the help!
-
Thanks,I will look for those values and see if I can make it work.