3DBRINK
About
- Username
- 3DBRINK
- Joined
- Visits
- 54
- Last Active
- Roles
- Member
Comments
-
Thinking about how many machines i could sell with this feature $$$$$$
-
I am also using a simple ON/OFF endstop type runout sensor. What settings should be used in Jam detection firmware if not using tracking with steps?
-
Nice
-
Why does Server show me names like Victoria-38?
-
Update fixed it thanks
-
Can i just run the update or do i have to flash the SD card image with v10?
-
New Pi touch screens seem ok no faults yet. The new ones have a black ribbon cable not gold.
-
I have 2 machines with V8 just stopping half way through print. Should i update to V10 and what firmware version is best for V10 Dev 1 or 96?
-
That would be important because the hardware is becoming more computerized and needs soft shutdown to prevent spikes and faults
-
Is it possible to move the Server Shutdown button to the front screen?
-
Apparently they dont handle the power switch very well and need a soft shutdown from the Raspberry pi. Where is the shutdown function?
-
Also how do i change what axis moves first at the start of a print?
-
Distortion.h: No such file or directory
-
Great thanks again fixed. Distortion.h won't compile in Arduino its the first time ive used the distortion correction so how do i get it to compile?
-
Also the Y drivers are on not next to each other but diagonal so would share the same heat
-
1mm layers Y axis missing steps? Any ideas? Y is running on 2 separate drivers at 640 steps per mm so it carn't be over heating and cutting out both driver at the same time. Could it be crosstalk or firmware bug? Overhang miss looks straight so must…
-
Running Auto bed level from the Console Commands would be nice
-
OK thanks ill have to put two in series or move endstop to the centre
-
It happens on a tool change, So where could this retract distance be coming from?
-
I have had 2 faulty Pi3's now both with wifi hardware problems that could not connect at all.
-
Doug40 said: Somehow or other I managed to delete the link. Here's a new one.https://1drv.ms/w/s!AoMNMLsOFAgFj-AnywOk94qGBizVrg Hi Doug40 i see the firmware example thanks.Do you have any screen shots showing where and what go's into si…
-
I am trying a Y feeder and Simplify3D. Is the firmware extruder switch retract/undo enough or do i need to put G10 and G11 in the tool change script?
-
This is for Y feeders with tool change script. Single hotend, No offsets :-)
-
Repetier said: I'm quite confident it improves. I'm working on new wifi handling and found out that NetworkManager does a bit more then expected so it really reconnects on it's own. On the other side for 4ft I would use a ethernet cable just …
-
After some time my wifi connection drops out and says Access point. Then i have to type wifi password again then okk and connected 0.80.3
-
Why do i sometimes get two QR codes and two network addresses in RS0.80.3?
-
Is this still the latest FW?
-
Where can i find Newer repetier firmware (1.0)?