willthethri11

Comments

• My printer is a ground up build so I don't have anyone to call for tech support. At this point if I knew someone willing to provide support, I'd probably be willing to pay.  I hope what you say is not true and that someone can help me.

  in temp sensor on extruder follows bed temp when extruder heater off Comment by willthethri11 November 2014
• I used a thermocouple with an independent thermocouple readout (Fluke 714) to check the reported temperature with the actual temp since I burned up a heater already.  I've also now melted down my J head and am buying a new one. I purchased my therm…

  in temp sensor on extruder follows bed temp when extruder heater off Comment by willthethri11 November 2014
• then I bumped the extruder to 70 C and read about 140C with the TC when the software showed 70C. I then turned off extruder heater and watched the temp come down to ambient via the TC.  However on Repetier it only came down to ~53C (bed is at 50C)

  in temp sensor on extruder follows bed temp when extruder heater off Comment by willthethri11 November 2014