› ›

RepRoland

About

Username
RepRoland
Joined
Visits
2
Last Active
Roles
Member

Comments

  • If that is a pwm pin with a timer not used by firmware you could simply use arduinos analogWrite command. The main problem is normally you need a high pulse rate to cover the complete line with pulses. Depends of course on laser diameter and speed. …
    in How to set a LASER PULSE Comment by RepRoland April 2016
  • Actually my laser has a focus light even when off, so that problem never occured to me. And letting it full power seemed to dangerous. I think for focussing we could make a special command and in temperature interrupt which is called 3906 times per …
    in Laser start Comment by RepRoland April 2016
  • Remko you are using the wrong baudrate or wrong port (if you have multiple ports). For that reason no communication occurs and nothing happens. A independent provlem is11:15:52.762 : OpenGL version:1.1.0 11:15:52.762 : OpenGL extensions:GL_WIN_swap_…
    in Arduino Mega 2560 / Ramps 1.4 with Repetier host Comment by RepRoland April 2016
  • We have no config_adv.h so I think you are not using our firmware:-)
    in Red fan extender / fan pin Comment by RepRoland April 2016
  • You better switch to repetier-server for sending data to printer. The server has a timeout that continues automatically when you have communication errors. In combination with latest firmware it is even better in correcting errors automatically and …
    in Printing jobs randomly stop Comment by RepRoland April 2016