Weaper
About
- Username
- Weaper
- Joined
- Visits
- 13
- Last Active
- Roles
- Member
Comments
-
The more I face this issue and the less it seems to come from printrboard.Here's what leads me to think that:- repetier server 0.80.0 on raspberi pi is stuck like never before. impossible to print anything, starting a new print launch the print that…
-
I just remembered that I had an old version repetier server installed locally, the 0.65.0I tested a similar gcode and the print started immediately... I guess it has something to do with the latest version then? Maybe a compability issue? an idea?
-
So, that's not what the issue was...The reason for my delayed response was that most of the time it only did that once or twice but rebooting the rasp was enough to set it straight. However today there is simple no talking it into working. Any other…
-
yes, as I was saying it's a Pi Cam v1.3Is it that Repetier Server is simply not compatible with cam priors to v2?I'll get a new can if needed but of course I'd rather not if I can use this one.
-
yes I do have a license
-
Nope, no change with Firefox. Still the same.
-
That may be it. I'm indeed using Chrome. I'll try with Firefox and get back to you. Thanks
-
That's the preset loaded when choosing the Pi cam settings. Which lead to the current situation.
-
That's the thing, I did use the Pi cam configuration and the 8080 port load the cam UI. However, all the spaces supposed to stream the cam are blank. the latest command you gave doesn't pass and adding sudo before doesn't give any feedback. I'm stu…
-
I use the latest SD image disk released. And indeed, I don't have any screen on my printer (Printrbot Metal Plus)I'll make the change you mentioned
-
I had the issue again several times.here's the log file of the latest tentative print (already 3 times that I'm trying it) https://www.dropbox.com/s/uanmpaolq5m00ky/Hands & Feet 4 sizes.log?dl=0
-
I had tried it already before my previous comment.I had a little "I own you!!" moment but without great success without the sudo I get the previous feedback but with it, nothing.
-
the new command is right but it returns: mjpg_streamer(1467): Operation not permitted mjpg_streamer: no process found same bind(8080) failed
-
the kill -9 mjpg_streamer command gives me: "-bash: kill: mjpg_streamer: arguments must be process or job IDs" as for the outputs, it's already in 640 X 480 at 5 fps this might be a lead: bind: Address already in use o: server_thread(): bind(8080) f…
-
I was able to plug my cam. The red led is alight, I can connect to it via SSH and the webcam server ui is there on :8080.but yeah, I still get a blank square instead of the mjepg http://i.imgur.com/I7J6IO7.png It's a Picam 1.3 so I guess it's a comp…
-
I get "supported=1 detected=0"guess I need to work that out.That's a good thing to have a way to know that. I'll start with this.thanks
-
yeah, the log most likely doesn't change anything. I just pointed out that it was the only change done.as for the reset, I had turned off/on the printer many times before coming here. well, it works now. thanks for your time.
-
what the... it started normally when I tried today. only difference was that I activated the logs...
-
I guess it's the cam's server that simply not running.I tried several time to restart it but the clicking on the button to that end under the "webcam" tab doesn't give any feedback the url only gives back a page error without anything of ui.