tonyallen28
About
- Username
- tonyallen28
- Joined
- Visits
- 98
- Last Active
- Roles
- Member
Comments
-
Der A1Mini hat die gleichen Abfrageanforderungen wie der P1, da sie einen reduzierten MQTT-Server haben. Es gibt auch kleine Nuancen in Bezug auf den Zugriff und das Hochladen von Dateien über die FTP-Server. Es wäre eine gute Idee, jedes einzelne (…
-
Ich bin auch bereit, ein A1 mini an Repetier zu spenden, um bei der Diagnose zu helfen. Lassen Sie mich bitte die beste Möglichkeit wissen. Ich habe mich auch gerade bei Patreon angemeldet.
-
I too am very interested in this. I currently have about 75 anycubic printers I control through Repetier-Server APIs. I would love to switch them over to Bambu printers and still keep Repetier-Server. I am willing to help out anyway possible to make…
-
What do you need for a board description?
-
I believe this may be related to the same issue as @execute. When I try to send @autostart_next_job the server crashes as well and I have to manually restart it.
-
Awesome thanks for the support.
-
When I deactivate/activate it does connect to it as far as the server shows the green link in the top left by the Printer name. However the temperature for the hotend doesnt update and the printer wont respond to any commands. On the console page it…
-
So to your last point the printers continue printing fine so I guess that means it is the UI thread. After doing some testing the error shows up after trying to add a new print job to the queue and after every attempt the error shows 4 times. With t…
-
Found the problem. Had to make the following change in ui.h under the #elif MOTHERBOARD == 37 // UltiMaker 1.5.7#define UI_DISPLAY_D7_PIN 6#define UI_DISPLAY_D7_PIN 36 If someone else is doing this through the dev firmware I would assume …
-
Thanks repetier. It is the 20x4 controller. I'm still using the non-dev firmware 92.9 maybe? Should I just change the uiconfig.h here? #define UI_LCD_WIDTH 128#define UI_LCD_HEIGHT 64to#define UI_LCD_WIDTH 20#define UI_LCD_HEIGHT 4 or change the dis…
-
Thanks repeiter I did have "Handling action 'listModels' caused error Not found" in my logs so I deleted all .gin files and let the server rebuild them. I think the server tried to rebuild all at once though here is a short clip from the server log:…
-
Thanks repetier that would be awesome. I believe you already said the AutoPrint bug would be fixed next release. Here's the previous post.https://forum.repetier.com/discussion/2136/autostart-next-job-crashes-if-no-jobs-in-que#latest
-
/var/lib/Repetier-Server/printers/~printerName~/jobs/If I recall correctly the print queue is stored here. However I'm not currently at my RPi so I cant confirm it. In the jobs folder there should be either 5 or 6 files per print job but you can del…
-
Seems like the problem is no connection to the internet.Are you using the pi via SSH or like a normal computer with keyboard and monitor?This site is a good step by step guide and covers both.
-
Good question I just read this " intel32: libc 2.19 like used in Ubuntu 14.04LTS amd64: libc 2.13 like used in Debian Wheezy " I'm not much of a Linux user I just knew I had Ubuntu 14.04LTS so I went with that. Would the amd64 been a better choice?
-
Thanks repetier for pointing me in the right direction. It turns out there was no libstdc++.so.6 in /usr/lib/x86_64-linux-gnu/libstdc++.so.6 even though libstdc++.so.6 was installed. After doing a bit of searching I found that installing the 32bi…
-
Thats genius! A gcode command would be even better that way i can have a slic3r profile for prints that need to be done automatically and another profile for ones that dont.