repman
About
- Username
- repman
- Joined
- Visits
- 20
- Last Active
- Roles
- Member
Comments
-
And again myself:-)Query the temperatures (targets and actual) is ok now. They get shown in the knomi display, are changeable and the display shows when it is heating. Very good.Still one thing is missing: The printer state. Query with http://:7125/…
-
Works! Your are the godfather of the Gurus!Thanks again and have nice evening!
-
Inspite of my posting -2 unfortunately most of the Knomi functions do not work correctly: If I send commands to the printer from Repetier-Server GUI or from the attached LCD-Display these commands get recognized by moonraker and Knomi sees these com…
-
yeah, I thought something like this, especially as this command changes temperatures, which could be a security risk if performed uncontrolled..But you must concede: This was not that obvious that it catches immediatly in someones eye. Thanks for yo…
-
Success!Now the logfile entries Unknown command:"M104 240" Unknown command:"M140 110"are gone and temperature changing after print does work again. But why on earth RepetierServer does not send the M104 S200 command again if I send a wrong M140 or …
-
Going more into deep could sometimes help :-) Checking the klippy_log file I found in the nearly endless lines of mcu stats some Unknown command lines:Unknown command:"T0" Unknown command:"M104 240" Unknown command:"M140 110"These just at the beginn…
-
So big question is where do you differ? When you enabled command in console, did you see the M104 was send? I ask because you did not answer the question if it was marked as unknown command before so server would filter it. In my case it was not mar…
-
Very good repetier, now it works! (with sudo chown -R)Knomi has access to moonraker and moonraker has access to klipper. The Display shows the actual printer status. Very nice! The disadvantage is that the user pi has now files in his home which he …
-
We are coming further:Installed moonraker as suggest and it runs with one hint: "No access to communication socket." pi@VoronGold:~/printer_data/config $ systemctl status moonraker.service ● moonraker.service - API Server for Klipper SV1 …
-
I thought it is more complicated as klipper is not in the default place (~/klipper). Will try that! Thanks for your efforts and help!
-
Ok, we are coming further .-) Repetier said: Ah, sought Knomi was a new printer model. :-) No, it is just a WLAN Touch Display. You can add it e.g. to the center of your Stealthburner extruder to display printing parameters :-)) Guess …
-
Repetier said: I mean we do not need or use moonraker at all. We need direct access to the klipper socket and if you install klipper inside Repetier-Server it works good and you can configure the printer even inside server. That is exac…
-
Sorry for my limitted knowledge, but I don't understand that:I do run Repetier-Server on the "pc" inside the printer (which is a raspberry Pi in my case) and klipper runs on the same raspberry Pi as well. So my server runs on the same machine as kli…
-
So in short: Repetier server does not support knomi!
-
Hi, I'm using always Logitech C270. They are cheap and work flawless on a Pi. Take care to use a usb hub due to power consumption of the cameras.
-
It does not really matter if you use M104/M140 or SET_HEATER_TEMPERATURE when klipper works as supposed. Sorry for troubling you, but I think it is a bug in RS:Entering after a finished print in console: SET_HEATER_TEMPERATURE HEATER=extruder TARGET…
-
Repetier said: Which interface are you using? Just tried touch and regular for extruder and bed and both did send the gcode expected. Do you have printed something and tried it afterwards again? At first try it works here too, but not after…
-
Just to be sure:After a klipper restart it looks like this:If I set temperature by menu to predefined ABS:Exec:10:26:21.518: @getipSend:10:26:21.521: N19 M117 192.168.1.64:3344Recv:10:26:21.522: ok (N19)Send:10:26:21.573: N20 M140 S110 This works mo…
-
I checked that in the console. I switched on Commands and ACK. If I try to switch the temperatures to predefined values nothing happens. RS does not send any command.If I write some value in the menu for the corresponding heating source (eg. 100°C …
-
Just tried one thing which could be a workaround:Restarting klipper from the WebGUI helps! After that the temperatures can be adjusted again. But why not before...
-
Coming back to this issue as it is still there.I did end of last year a complete new setup with all the settings as advised in the RS-Doku. I took an image for the raspberry pi as suggested, so everything is up-to-date and in the right place. If the…
-
Thanks! I will try!
-
Ok, I will give it a try. Do you have a more detailed example in the docs? (Where to put the commands @monitorCall Name "Expression" timeoutMS hitFunction missFunction)Regards
-
I see what you mean, but my problem is at lower level I think. It is not that complicated: Example: If I start a quad gantry leveling via command I want to see the results from klipper during that test. While the probe is testing klipper writes the …
-
Just for the records:I checked the whole wiring and especially all connectors. I removed the connectors and reconnected everything and checked the continuity on the toolhead. The error seems to be gone now (means it did not occur during up to the la…
-
Ok, I see! Because of my some kind of outdated touchscreen I'm still on the buster image. I have updated to pi dev version to also listen to [temperature_sensor chamber]. Login via ssh and run installDev and see if it works. Works! Thank you repe…
-
Where can I get that "installDev" from and where should I put it?I don´t have that script/program.
-
Installed the Nightly from 2.1.2024.Same behavior! I'll check/exchange the hardware...
-
Sorry, no success. As I just want to monitor the chamber temperature I added a sensor. In my printer.cfg: ###################################################################### Chamber #############################################################…
-
Installed the Nightly 2024-01-01 Pro 1.4.15:Unfortunately the same behavior. TEST_RESONANCES AXIS=X and Y works, Menu entry and SHAPER_CALIBRATE AXIS=X NAME=data FREQ_START=1 FREQ_END=133 HZ_PER_SEC=1 do not.Don´t see how to come further....Will ch…