Lutunen
About
- Username
- Lutunen
- Joined
- Visits
- 49
- Last Active
- Roles
- Member
Comments
-
Ok,
-
I do not believe the reason is voltage drop because the server and both 2 printers are behind UPS-devices that keep constant voltage several minutes after total power loss. In my experience I have not seen communication breaks with other slicers pri…
-
In my case connection works with 0.70.1 similar as with 0.65. Printing stops in about 30min - 2h after start. I have tried with 2 printers (Andciv CM3E 3D motherboard). Log of both test prints/ printers seem to be normal until the stop happens. Aft…
-
OK, I'll inform if I find something in printed log. I made clean installation of 0.70 but printing stops in few seconds. I had to revert 0.65 because it more or less functions in my case. As informed earlier I don't have connection issues with othe…
-
Printers LCD screen actually shows only 3 digits, when I boot the printer first it shows 125 and then it will turn 100.According to the manufacturer of Glitar 6C printer, the slicer is Cura. Setting instructions were to use Marlin as firmware.By def…
-
This is correct, I use Marlin settings. If I try to ask the manufacturer information to get the board function with Repetier server what should I ask?
-
The firmware is andcivfw.bin which I got from the manufacturer in China. My printers are Clitar 6C which have Andciv CM3G3 mainboard. It has been really difficult to get information/support from there. But the printer itself works fine (if printed…
-
I'm happy to announce that this issue is completely solved now! The problem was in my old computer. Now everything works well! This is really great software specially when operating in more than one printer and when print runs are very long! ^:)^
-
The connection problem seems to be elsewhere. I changed to brand new Win 7 laptop and now the connection problem disappeared. There must be some technical issue with my original PC. I just don't know what...
-
Andciv CM3E 3D gets power from 3D printers power supply, not from USB
-
It seems this irritating problem happens when I have two printers (with Andciv CM3E 3D motherboard) connected. When I have just one printer everything seems to be ok, but with two I get problems.
-
Yes indeed, there is only chinese website it can be downloaded:http://pan.baidu.com/wap/link?uk=3862727611&shareid=3095743820&third=4 - You can download it from blue link on left with chinese text + (3.25KB).I can also send it by email if ne…
-
Breaking down happens even windows is awake (not in standby). Windows driver is andciv-cm3.inf. Does this help?