bellocla

...sorry...solved...sorry again

in Repetier Server on raspberry failed to start Comment by bellocla February 2023

Yes...i have PRO version. no the tune entry isn't avaiable during a print not loaded via SDcard. Ok, i've understood. I'll try with mobile app and i create a quick command also...ty a lot.

in Adjusting Z axis distance from bed during print (via software) Comment by bellocla February 2023

Sorry if i resume this post but now that i've a working 3d printer, i need to understand this. So i recap the question: when i start a print via SD card, if i see that the Z.axis offset isn't right (because the extrusion is too far from bed or v…

in Adjusting Z axis distance from bed during print (via software) Comment by bellocla February 2023

Repetier said: Check the log if there is a message when printer runs out of filament. Unfortunately some are configured to say nothing when not printing from sd card and without message we can not see and react. In that case you need to uploa…

in ENder 3 S-1 sendor filament doesn't function when print activated via Repetier-Server Comment by bellocla February 2023

Repetier said: Just communication errors that got detected and fixed. Can happen from time to time which is why checksums are used. So if it is not constantly appearing that is nothing to worry about. Only if it is frequent and buffer is grea…

in Multiple errors in console "checksum mismatch" Comment by bellocla February 2023

I don't know why but now th print is blocked....here console messages: Recv:17:10:50.127: T:194.96 /195.00 B:60.02 /60.00 @:255 B@:24 FAN0@:255 FAN1@:255Recv:17:10:51.128: T:194.91 /195.00 B:59.99 /60.00 @:255 B@:26 FAN0@:255 FAN1@:255Recv:17:10:51.…

in Multiple errors in console "checksum mismatch" Comment by bellocla February 2023

I will reinstall the raspberry image. I can't go to the register menu to deactivate the license on this install...the new one on the same machine, will it decrease the available licenses?