› ›

matoth

CraftBot XL

About

Username
matoth
Joined
Visits
1
Last Active
Roles
Member

Comments

  • Thanks for the update too! Sorry, maybe I was misleading again:  The Queue enabling M1020 is worsen the print quality, and doesn't add anything to the communication. Here is a example: https://photos.app.goo.gl/oyraw6C5U5J3A7eV8 I was soo close to…
    in CraftBot - M110 S1 Comment by matoth June 2022
  • MQTT: Thanks for the MQTT, I will look into it! M73: M73 seems good now, thanks! Firmware: I tested the new Firmware option on all printers, and I FOUND THE problem.... It was never the errors, or the communication type, it was the queue. In the o…
    in CraftBot - M110 S1 Comment by matoth June 2022
  • Sorry for leading you in the RepRap direction, I was blindfolded at the start because RepRap could work in PinPong and Paralell, but I stopped testing Marlin at the paralell, and only now after we started to talk I tested the Marlin Paralell, which …
    in CraftBot - M110 S1 Comment by matoth May 2022
  • I just tested the Craftbot Firmware option you made, but it freezez when it starts. And not waiting for heat up, because the display shows that it's just waiting for... something. I tired to manually send some commands, but it doesn't react to anyth…
    in CraftBot - M110 S1 Comment by matoth May 2022
  • Thank you soo much for the much needed help! Soo... I concluded a big test, half a day worth. My conclusion is wierd. You will see a spreadsheet in the drive folder, I concluded every try there with notes. TL/DL: Using Marlin settings makes print …
    in CraftBot - M110 S1 Comment by matoth May 2022
  • The test cylinder is created in Prusa slicer, when inported to Solidworks, it show a 0,3mm segment size: https://photos.app.goo.gl/JFdXhEdqge9WHgrk6 But the other prints (holder for scales) was generated in Solidworks, exported to 3MF, and after mea…
    in CraftBot - M110 S1 Comment by matoth May 2022
  • Yes, they looks like segments. The speeds are: Ping-Pong: 969.4/ 3,252.6 / - Lines/s W/o Ping-Pong, 1 Paralell, 127 Byte : 963.8 / 3,045.2 / - Lines/s W/o Ping-Pong, 2 Paralell, 127 Byte : 1,304.3 / 3,385.4 / - Lines/s I use Prusa Slicer, and the G…
    in CraftBot - M110 S1 Comment by matoth May 2022
  • Thank you for the answears! 1: Thanks, it worked ! 2: Here is some pictures of what I mean about artifacts/squerish round parts: https://photos.app.goo.gl/QuDAzTNM7wSZJ1eq6 About speed: When adjusting printig speed multiplier (to 90-80%), the curv…
    in CraftBot - M110 S1 Comment by matoth May 2022
  • For the first question, this is the g-code that should be sent: Before print job starts: T0 ; select head 1 M110 S1 ; initialize the printer and the display G28 ; Home all axes M1020 S1; Set queue 1
    in CraftBot - M110 S1 Comment by matoth May 2022